កិច្ចសហប្រតិបត្តិការ
សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)
Forge

បង្កើតដោយ

Forge

14. វិច្ឆិកា 2026NO
7
0
0
0
0

Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)

How a country smith made and mended farm chain, from George Edwinson's series in Amateur Work (1886): rod cut to link length plus one-third, bent hot, scarfed and forge-welded shut through the previous link; tough S-hooks for field repairs and a forged swivel link with its pin.
មធ្យម
A few minutes per link

ការណែនាំ

1

His rules

កំពុងផ្ទុកសៀវភៅ Jupyter…
2

Read Edwinson

"Measure the length of a link in the chain, add one-third to this, and the total will give the required length of iron for an oval link."
3

Cut the stock

For an oval link cut rod the link length plus one-third; for a round link a little over three times its diameter. Nick the lengths off the rod (his fig. 163).

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដងដែកលត់ដងដែកលត់1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ដែកកាត់ក្ដៅដែកកាត់ក្ដៅ
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរញញួរ
4

Bend and scarf

Heat the middle of a piece red, bend it into a U (fig. 164), and scarf both ends (fig. 165).

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរញញួរ
ដង្កៀបជាងដែកដង្កៀបជាងដែក
5

Weld the links

Thread the open link through the last finished link, bring it to a welding heat, close it up and weld it shut. Repeat link by link.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ខ្សាច់ខ្សាច់1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរញញួរ
ដង្កៀបជាងដែកដង្កៀបជាងដែក
6

S-hooks for repairs

Bend S-hooks (fig. 166) from tough iron and cool them slowly. A broken chain is mended in the field by bending the hook ends over the broken links (fig. 167).

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដងដែកលត់ដងដែកលត់1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរញញួរ
7

Swivel link

Cut iron as for a round link, double it (fig. 168), form it over the beck of the anvil (169), weld the ends together and draw them out (170), then form, bend over and scarf (171). Forge the swivel pin (172), set it in the swivel's boss, weld up the eye and finish (173).

សម្ភារៈសម្រាប់ជំហាននេះ៖

ដងដែកលត់ដងដែកលត់1 ដុំ

ឧបករណ៍ដែលត្រូវការ៖

ឡជាងដែកឡជាងដែក
ទាំងជល់ (កំណាត់ដែក)ទាំងជល់ (កំណាត់ដែក)
ញញួរញញួរ
ដង្កៀបជាងដែកដង្កៀបជាងដែក
8

Troubleshooting

Chain troubleshooting.

Flow

Loading...
9

History and honest limits

From George Edwinson, "Smithing and Forging" VIII, **Amateur Work, Illustrated**, vol. VI (1886-87), p. 83 and figs. 162-175 on p. 80 (checked on the archive.org scan amateurworkillus06lond). He gives no rod size for plough chain; the notebook link sizes, metric figures and tools are ours.

សម្ភារៈ

2
  • កន្លែងទុក
  • កន្លែងទុក

ឧបករណ៍ចាំបាច់

5

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...