សិល្បៈ
សម្រស់ និង សុខុមាលភាព
សិប្បកម្ម
វប្បធម៌ និង ប្រវត្តិសាស្ត្រ
ការកម្សាន្ត
បរិស្ថាន
ម្ហូប និង ភេសជ្ជៈ
វិស្វកម្មបញ្ច្រាស
វិទ្យាសាស្ត្រ
កីឡា
បច្ចេកវិទ្យា
ប្រដាប់ដែលស្លៀក
Guitar Strings: Bronze Wound on Steel, Then Heat-Soaked (Stone and Falcone 1977)
Woody

បង្កើតដោយ

Woody

28. តុលា 2026NO
3
0
0
0
0

Guitar Strings: Bronze Wound on Steel, Then Heat-Soaked (Stone and Falcone 1977)

A wound string is a steel core with another wire wrapped round it. Stone and Falcone believed the wrap keeps stresses from the winding and slowly unwinds as the string is played, so the tone goes dead. Their fix: after winding, heat-soak the string, at least 2 hours at 270 °F or 30 minutes at 480 °F for a bronze wrap, then let it cool. Source: W. N. Stone and A. S. Falcone (National Musical String Co.), US 4,063,674 (1977). Unknown: the winding itself (the patent calls it conventional), where phosphor bronze wire comes from, and the gauges. These are linked to unknown heads. The plain strings of the set are steel music wire; that, the oven and the nitrogen are ours. Picture drawn by Youblob.
កម្រិតខ្ពស់
1 day

ការណែនាំ

1

Cut the core and plain strings

Cut steel music wire for the cores of the wound strings and for the plain strings of the set. Unknown: the gauges and lengths, and the ball ends.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ខ្សែដែកភ្លេង ០.០៣២ អ៊ិញខ្សែដែកភ្លេង ០.០៣២ អ៊ិញ1 as required

ឧបករណ៍ដែលត្រូវការ៖

ដង្កាប់កាត់លួសទ្រេតដង្កាប់កាត់លួសទ្រេត
វិមាត្រមិនស្គាល់វិមាត្រមិនស្គាល់
2

Wind the bronze wrap at room temperature

Wrap phosphor bronze wire helically round each core at room temperature. The patent prefers a wrap that expands more with heat than the core. Unknown: how; the patent says only 'in a conventional manner'.

សម្ភារៈសម្រាប់ជំហាននេះ៖

ខ្សែលួសសំរិទ្ធផូស្វ័រខ្សែលួសសំរិទ្ធផូស្វ័រ1 as required

ឧបករណ៍ដែលត្រូវការ៖

វិធីរុំមិនស្គាល់វិធីរុំមិនស្គាល់
វិមាត្រមិនស្គាល់វិមាត្រមិនស្គាល់
វ៉ែនតាសុវត្ថិភាពវ៉ែនតាសុវត្ថិភាព
3

Heat-soak the wound strings

Heat the wound strings for a bronze wrap at 270-480 °F (132-249 °C): at least 2 hours at 270 °F or at least 30 minutes at 480 °F, shorter the hotter. If the wire tarnishes in hot air, do it without air, in nitrogen or carbon dioxide. The wrap's turns settle into more even spacing.

ឧបករណ៍ដែលត្រូវការ៖

ឡដុតនំឡដុតនំ
ទែម៉ូម៉ែត្រមន្ទីរពិសោធន៍ទែម៉ូម៉ែត្រមន្ទីរពិសោធន៍
ធុងឧស្ម័នអាសូតធុងឧស្ម័នអាសូត
4

Cool and set up the set

Let the strings cool back to room temperature. Make up the set with the plain steel strings.

ឧបករណ៍ដែលត្រូវការ៖

ដង្កាប់កាត់លួសទ្រេតដង្កាប់កាត់លួសទ្រេត

សម្ភារៈ

2

ឧបករណ៍ចាំបាច់

7

ប្លង់ពាក់ព័ន្ធ

ប្លង់ទាំងនេះចែករំលែកចំណេះដឹង — បច្ចេកទេស សម្ភារៈ ឬគោលការណ៍

CC0 សាធារណៈ

ប្លង់នេះត្រូវបានចេញផ្សាយក្រោម CC0។ អ្នកមានសិទ្ធិចម្លង កែប្រែ ចែកចាយ និងប្រើប្រាស់ដោយមិនចាំបាច់សុំអនុញ្ញាត។

គាំទ្រអ្នកបង្កើតដោយទិញផលិតផលតាមរយៈប្លង់របស់ពួកគេ ដែលពួកគេទទួលបាន កម្រៃជើងសារអ្នកបង្កើត កំណត់ដោយអ្នកលក់ ឬបង្កើតកំណែថ្មីនៃប្លង់នេះ ហើយបញ្ចូលជាការតភ្ជាប់ក្នុងប្លង់របស់អ្នកដើម្បីចែករំលែកចំណូល។

ការពិភាក្សា

(0)

ចូល ដើម្បីចូលរួមពិភាក្សា

កំពុងផ្ទុកមតិ...