예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Stepped Spiral Egg Beater: A Stepped Dasher Spun in a Square Box
A beater spun in a round bowl soon drags the whole mixture round with it.
Thomas McBean of Fowlerville, New York, received US 24,134, dated 24 May 1859, for an egg beater: "a double spiral-shaped beater or dasher with its surface formed into steps within a square box," turned horizontally on a vertical shaft by a bevel pinion and a handle, so that the dasher and the square box together "so thoroughly breaks up all portions of the eggs that they may be well and very thoroughly beaten in a few seconds."
This rung compares the side and corner gaps, then prints the stepped dasher, builds a square box with a bevel drive, and times beating in the box against a round bowl.
중급
About 4 hours, plus printing
안내
1
1
Tip speed and the corners
Tip speed and the corners
Jupyter 노트북 불러오는 중…
2
2
A geared beater a month before it
A geared beater a month before it
The embedded blueprint beats with two wire whisks turning opposite ways. McBean turns one stepped dasher and lets the box's corners do the breaking up.
3
3
Read US 24,134
Read US 24,134
"The nature of my invention consists in arranging a double spiral-shaped beater or dasher with its surface formed into steps within a square box and in communicating to this dasher a swift rotary motion so as to revolve it horizontally within said box."
4
4
Print the dasher
Print the dasher
Print the stepped double-spiral dasher (/uploads/blueprints/stepped-spiral-egg-beater-dasher.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
이 단계의 재료:
PETG 필라멘트1 개필요한 도구:
FDM 3D 프린터5
5
Build the box
Build the box
Cut a plywood base and four sides to make a box 104 mm square inside and 90 mm deep. Glue and screw it, and seal the inside seams with silicone.
이 단계의 재료:
합판1 개
#8 × 1인치 나무 나사1 개
실리콘 실런트1 개필요한 도구:
실톱(코핑 소)
무선 드릴
드릴 비트 세트
드라이버 세트
자6
6
Fit the shaft and gears
Fit the shaft and gears
Screw a hardwood bar across the box's top with a bracket above it. Run a 5 mm rod down through the bar to a socket in the floor, with the dasher at its foot and one bevel gear at its top; mount the other gear on a crank shaft through the bracket so they mesh.
이 단계의 재료:
경목 블록1 개
연강 환봉1 개
베벨 기어 세트(강, 1:1)1 개
2액형 에폭시1 개
평와셔1 개필요한 도구:
쇠톱(핵소)무선 드릴드릴 비트 세트
바이스(만력)7
7
The patent drawing
The patent drawing
US 24,134 drawing sheet, public domain (expired patent).
8
8
Square box against round bowl
Square box against round bowl
Beat two egg whites in the box at about two crank turns a second and time them to stiff peaks. Repeat with the dasher in a round bowl of the same size.
이 단계의 재료:
달걀4 개필요한 도구:
큰 스테인리스강 믹싱볼
스톱워치9
9
A dasher that swirls, scrapes or slips
A dasher that swirls, scrapes or slips
Stepped spiral egg beater troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Thomas McBean** of Fowlerville, Livingston County, New York, received US 24,134, dated 24 May 1859. The dasher's spiral circular plates are soldered to a small tube and bent into steps radial from the axis; the shaft passes up through the box's cover to a bracket, its lower end resting on a pin in the box's bottom. He claimed the double spiral dasher in combination with the square box.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. A printed dasher and a bought 1:1 bevel pair stand in for his tin plates and pinions. Your times are the result.
재료
10- 1 개플레이스홀더
- 1 개플레이스홀더
- 플레이스홀더
- 1 개플레이스홀더
- 1 개플레이스홀더
- 1 개플레이스홀더
- 플레이스홀더
- 1 개플레이스홀더
- 1 개플레이스홀더
- 4 개플레이스홀더
이 블루프린트로 만드는 것
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.