예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Wire-Coil Potato Masher: A Flat Spiral of Wire on Five Braces
A solid masher has nowhere for the potato to go but sideways.
Myron H. Monroe of Rochester, New York, received US 73,743, dated 28 January 1868, for an article for mashing potatoes or other vegetables made of tinned or plated wire: a coil "leaving a space between the wires ... for the purpose of allowing the vegetables to pass through the coil when used," with five braces soldered to it — one at the centre and four round the outer circle — brought together into a handle.
This rung works out the wire needed, then bends the coil and braces from stainless wire, prints the handle, and mashes a pan of potatoes.
중급
About 2 hours, plus printing
안내
1
1
Wire for the coil
Wire for the coil
Jupyter 노트북 불러오는 중…
2
2
Wire kitchen tools before it
Wire kitchen tools before it
The embedded blueprint beats eggs with wire floats. Monroe bends one wire into a flat coil to mash through.
3
3
Read US 73,743
Read US 73,743
"I construct my vegetable-masher of tinned or plated wire, of suitable size, forming a coil, a, of sufficient size, leaving a space between the wires, as seen in drawing, at a, for the purpose of allowing the vegetables to pass through the coil when used."
4
4
Bend the coil
Bend the coil
From 3 mm stainless wire, bend a flat spiral 3.5 turns from 16 mm across at the centre, about 9 mm between turns, leaving both ends long.
이 단계의 재료:
스테인리스 와이어1 개필요한 도구:
둥근 코 펜치
평집게
바이스(만력)
가죽 작업 장갑5
5
Bend the braces
Bend the braces
Bend the two long ends up at right angles as two braces. Add a centre wire and two more to the outer turn, wrapping each round the coil, so five braces meet 150 mm above it.
이 단계의 재료:
스테인리스 와이어1 개필요한 도구:
평집게
쇠톱(핵소)가죽 작업 장갑
투명 보안경6
6
Print and fit the handle
Print and fit the handle
Print the handle (/uploads/blueprints/wire-coil-potato-masher-handle.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use. Twist the five ends together, file them, and epoxy them into the handle's bore.
이 단계의 재료:
PETG 필라멘트1 개
2액형 에폭시1 개필요한 도구:
FDM 3D 프린터
줄 (손줄)7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the flat 3.5-turn coil of 3 mm wire, a centre brace and four outer braces meeting 150 mm up, and the printed handle.
8
8
Cook and mash
Cook and mash
Boil 500 g of potatoes, peeled and quartered, in salted water for about 20 minutes until a knife slides in; drain. Mash them with the coil and time it to no lumps.
이 단계의 재료:
감자1 개
물1 개필요한 도구:
깊은 편수 냄비
디지털 주방 저울
스톱워치9
9
A coil that bends, braces that loosen
A coil that bends, braces that loosen
Wire-coil potato masher troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Myron H. Monroe** of Rochester, New York, received US 73,743, dated 28 January 1868. Two of the braces are the ends of the coil bent at right angles; one is at the centre and the others are soldered at equal distances round the outer circle; their upper ends are joined by solder and set in the handle. He claimed the coil, braces and handle in combination.
**Honest limits.** Wrapped stainless wire stands in for his soldered tinned wire, and a printed handle for his. Your times are the result.
필요 도구
11- 플레이스홀더
- 플레이스홀더
- 플레이스홀더
- 플레이스홀더
- 플레이스홀더
- 플레이스홀더
- 플레이스홀더
- 플레이스홀더
- 플레이스홀더
- 플레이스홀더
- 플레이스홀더
이 블루프린트로 만드는 것
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.