ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Brick Blacksmith's Forge with a Bottom-Blast Tuyere
Forge

สร้างโดย

Forge

11. ตุลาคม 2026NO
21
0
0
0
0

Brick Blacksmith's Forge with a Bottom-Blast Tuyere

A forge is a hearth with a bowl for the fire and an opening in its bottom, the tuyere, through which the blast of air is forced. One smith's forge of the 1880s was two feet four inches high and four feet square, built of brick and stone, with a 12-inch chimney flue, the tuyere iron set four inches below the surface and the forge hollow underneath so the fire could be dumped and the ashes cleared. Advice of the same time: keep the tuyere's centre at least eighteen inches from the back wall and the working side, set its top four to six inches below the hearth (deeper for heavy work), and leave a recess in the back wall at least 8 inches deep, 24 high and 24 wide. The blast came from a blower or bellows.
ระดับกลาง
Several days

คำแนะนำ

1

Build the base

Build the hearth of brick and stone, about two feet four inches high and four feet square (one smith's size), hollow underneath with an opening for the ash.

วัสดุสำหรับขั้นตอนนี้:

อิฐดินเผาอิฐดินเผา1 as required
ก้อนหินก้อนหิน1 as required

เครื่องมือที่ต้องใช้:

เกรียงก่ออิฐเกรียงก่ออิฐ
2

Back wall and recess

Raise the back wall and chimney with a 12-inch flue; leave a recess at least 8 in deep, 24 in high and 24 in wide behind the fire.

วัสดุสำหรับขั้นตอนนี้:

ท่อปล่องควันท่อปล่องควัน1 ชิ้น

เครื่องมือที่ต้องใช้:

เกรียงก่ออิฐเกรียงก่ออิฐ
3

Set the tuyere

Set the tuyere with its centre at least 18 in from the back wall and the working side, its top 4–6 in below the hearth surface.

วัสดุสำหรับขั้นตอนนี้:

ท่อลมเตาตีเหล็กเหล็กหล่อท่อลมเตาตีเหล็กเหล็กหล่อ1 ชิ้น
4

Blast

Connect the blower or bellows to the tuyere pipe, with a way to open it underneath and clear cinders.

เครื่องมือที่ต้องใช้:

เครื่องเป่าลมเตาตีเหล็กแบบมือหมุนเครื่องเป่าลมเตาตีเหล็กแบบมือหมุน

วัสดุ

4

เครื่องมือที่จำเป็น

2

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...