ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Condenser Worm: Copper Tube Coiled in a Water Tub
A still's vapour becomes liquid again in the worm: a copper tube coiled in a tub of cold water. Ure (1839) describes copper stills with a capital and worm, and retorts piped to a worm-tub. Fill copper tube with dry sand so it bends without kinking, wind it round a wooden drum with a steady fall, and set it in a tub with the outlet through the side near the bottom.
The picture: our diagram, the worm in its tub, vapour in at the top and liquid out at the bottom.
ระดับกลาง
A day
คำแนะนำ
1
1
Fill the tube
Fill the tube
Cork one end of the copper tube, fill it with dry sand tamped down, and cork the other end.
วัสดุสำหรับขั้นตอนนี้:
ท่อทองแดง8 m
ทราย2 กก.
จุกไม้ก๊อก2 ชิ้นเครื่องมือที่ต้องใช้:
ค้อนไม้2
2
Wind the coil
Wind the coil
Saw a log into a drum about 30 cm across (our size). Anneal the tube in the fire if it is stiff, then wind it slowly round the drum, letting each turn fall about 5 cm, so the liquid always runs downhill.
วัสดุสำหรับขั้นตอนนี้:
ท่อนไม้เนื้อแข็ง (โอ๊ก เมเปิล บีช)1 ชิ้นเครื่องมือที่ต้องใช้:
เลื่อยมือ
เตาตีเหล็กของช่างตีเหล็ก
ถุงมือกันความร้อน3
3
Empty the sand
Empty the sand
Slide the coil off the drum, pull the corks and shake and wash out all the sand.
วัสดุสำหรับขั้นตอนนี้:
น้ำ5 ลิตรเครื่องมือที่ต้องใช้:
ถัง4
4
Set it in the tub
Set it in the tub
Drill the tub near its bottom for the outlet, pass the lower end out through it and seal the hole with a cork and tallow. Fill the tub with cold water; renew the water as it warms.
วัสดุสำหรับขั้นตอนนี้:
จุกไม้ก๊อก1 ชิ้น
ไขมันสัตว์ (ไขวัว)0.05 กก.
น้ำ100 ลิตรเครื่องมือที่ต้องใช้:
ถังไม้ขนาดใหญ่
สว่านมือ5
5
Tube for the coil
Tube for the coil
กำลังโหลดสมุด Jupyter…
วัสดุ
6- 8 mตัวยึดตำแหน่ง
- 2 กก.ตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- 105 ลิตรตัวยึดตำแหน่ง
- 0.05 กก.ตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


