ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Inked Fabric Printer Ribbon: Tricresyl Phosphate, Castor Oil and Carbon Black Ink (Neidich, Underwood, US 2,139,092)
Charlie

สร้างโดย

Charlie

31. ตุลาคม 2026DE
9
0
0
0
0

Inked Fabric Printer Ribbon: Tricresyl Phosphate, Castor Oil and Carbon Black Ink (Neidich, Underwood, US 2,139,092)

Ribbon inks made with plain oils went thin in warm weather and rancid with age, so the ribbon printed unevenly and soon dried out. Neidich replaced half the oil with tricresyl phosphate, which keeps the ink at an even thickness and does not oxidise. Result: a fabric ribbon saturated with a non-drying black ink for typewriters and printers. Source: Neidich, US 2,139,092 (Underwood Elliott Fisher, 1938). Not given: which fibre the ribbon is woven from (he says only an absorbent fabric), how the ink is put on. Picture drawn by Youblob.
ระดับกลาง
2 hours

คำแนะนำ

1

Weigh the ink

Parts by weight: tricresyl phosphate 50, castor oil 50, carbon black 20, Prussian blue toning base 20. Neidich allows some variation.

วัสดุสำหรับขั้นตอนนี้:

ไตรครีซิลฟอสเฟตไตรครีซิลฟอสเฟต50 parts
น้ำมันละหุ่ง (บีบเย็น ปราศจากเฮกเซน)น้ำมันละหุ่ง (บีบเย็น ปราศจากเฮกเซน)50 parts
ผงคาร์บอนแบล็กผงคาร์บอนแบล็ก20 parts
สีน้ำเงินปรัสเซียสีน้ำเงินปรัสเซีย20 parts

เครื่องมือที่ต้องใช้:

เครื่องบดเครื่องบด
2

Grind the pigments into the oils

Grind the carbon black and Prussian blue with the tricresyl phosphate and castor oil in a mill until the colour is spread evenly through the ink.

เครื่องมือที่ต้องใช้:

เครื่องบดเครื่องบด
3

Take an absorbent ribbon fabric

Use a woven ribbon of absorbent fabric. Neidich does not say which fibre or width.

วัสดุสำหรับขั้นตอนนี้:

ผ้าริบบอนที่ยังไม่ชุบหมึกผ้าริบบอนที่ยังไม่ชุบหมึก1 as required

เครื่องมือที่ต้องใช้:

กรรไกรกรรไกร
4

Saturate the ribbon

Saturate the ribbon with the ink. Neidich says only that it is applied as usual. Ours: run it through the ink and squeeze it between rollers so it is evenly wet, not dripping.

เครื่องมือที่ต้องใช้:

ลูกกลิ้งคู่เคลือบแบบจุ่มลูกกลิ้งคู่เคลือบแบบจุ่ม

วัสดุ

5

เครื่องมือที่จำเป็น

3

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...