ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Smith's Work Furnace of Rammed Clay With a Bellows Hole Through a Wooden Back (Theophilus, 12th Century)
The medieval workshop forge from Theophilus's De Diversis Artibus (12th century): a wooden back fixed in the ground by the wall with a finger-size bellows hole, a box of boards four fingers apart rammed two-thirds full of fresh-dug clay, then a hearth of clay and horse dung, pierced through the hole for the bellows tube. "In this manner compose all smith's furnaces."
เริ่มต้น
About 1 day plus drying
คำแนะนำ
1
1
His measures
His measures
กำลังโหลดสมุด Jupyter…
2
2
Read De Diversis Artibus, Book III
Read De Diversis Artibus, Book III
"Near the wall, by the window, on the left side of the person sitting, a piece of wood is fixed in the ground."
3
3
Set the wooden frame
Set the wooden frame
Fix a piece of wood firmly in the ground near the wall, three feet long and scarcely two fingers thick, with a finger-size hole through it four fingers above the ground. Peg on in front a straight piece four fingers wide and as long. In front of this fasten another of equal breadth and length so there is a space of four fingers between them, held outside by two or three stakes.
วัสดุสำหรับขั้นตอนนี้:
แผ่นไม้เนื้อแข็ง3 ชิ้น
หลักไม้3 ชิ้น
เดือยไม้1 ชิ้นเครื่องมือที่ต้องใช้:
เลื่อยมือ
สว่านมือหมุนพร้อมดอก
ค้อน
พลั่ว4
4
Ram the clay
Ram the clay
Take clay newly dug, not beaten nor mixed with water, put a little into the space and ram it hard with a rounded piece of wood, then more, until two parts of the space are filled and the third left empty. Take away the front wood, cut the clay level in front and on top with a long knife, and beat it hard with a thin piece of wood.
วัสดุสำหรับขั้นตอนนี้:
ดินเหนียว1 ชิ้นเครื่องมือที่ต้องใช้:
มีดตัดหนัง
ค้อนไม้5
5
Make the hearth
Make the hearth
Beat clay mixed with horse dung and make the furnace and its hearth, covering the wall so the fire cannot burn it. Pierce the clay with a slender stick through the hole in the back wood, for the bellows tube.
วัสดุสำหรับขั้นตอนนี้:
ดินเหนียว1 ชิ้น
มูลสัตว์1 ชิ้นเครื่องมือที่ต้องใช้:
ค้อนไม้
พลั่ว6
6
Dry it
Dry it
Put the bellows tube in the hole, lay fire and charcoal at the back and front, and blow to dry the furnace.
เครื่องมือที่ต้องใช้:
สูบลม (เครื่องเป่าลมมือ)7
7
Troubleshooting
Troubleshooting
Furnace troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From Theophilus, **De Diversis Artibus**, Book III, chapter III, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, p. 211). The finger-to-centimetre figures, the tools and the diagram are ours.
วัสดุ
5- 3 ชิ้นตัวยึดตำแหน่ง
- 3 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

