ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Tsvet's Column: The First Chromatogram
In 1903 a Russian-Italian botanist working in Warsaw poured an extract of green leaves into a glass tube packed with powdered chalk, washed it through with petroleum solvent, and watched the single green smear pull apart into separate coloured bands down the column.
Mikhail Tsvet called the result a *chromatogram* — a writing in colour — and it is the ancestor of every separation in this batch. His insight was that leaf green is not one substance: it is two chlorophylls and a family of yellow and orange carotenoids, and they stick to chalk with different strengths. The one that clings least travels furthest.
The technique was ignored for thirty years, partly because Tsvet published in Russian and partly because the leading plant chemist of the day insisted the bands were artefacts. You can settle that argument yourself in an afternoon with chalk and a glass tube.
ระดับกลาง
4 hours
คำแนะนำ
1
1
Get the pigments out of the leaf
Get the pigments out of the leaf
Grind a handful of fresh spinach in a mortar with a little clean sand and enough ethanol to make a slurry, then filter. You want a dark green extract, not a pale one.
The sand is doing real work: it tears the cell walls and the chloroplast membranes open so the solvent can reach pigments that are otherwise locked inside. Grinding without it gives a weak extract and a column with nothing to show. Keep the extract in the dark — chlorophyll bleaches in light, and a sunlit extract loses its top band before you have packed the tube.
วัสดุสำหรับขั้นตอนนี้:
ผักโขม100 ก.
เอทานอล - เกรดห้องปฏิบัติการ 95 %50 มล.
ทรายควอตซ์20 ก.เครื่องมือที่ต้องใช้:
ครกและสาก
กรวยแก้วมีก้าน
กระดาษกรอง
บีกเกอร์โบโรซิลิเกต2
2
Pack the column evenly, or it will run crooked
Pack the column evenly, or it will run crooked
Plug the bottom of a glass tube with a small wad of cotton wool, add a centimetre of sand, then pour in powdered chalk a little at a time, tapping the side constantly, to a depth of about 15 cm. Finish with another centimetre of sand on top.
Tapping is not fussiness. Any gap or crack in the packing becomes a channel the solvent races down, and the bands come out slanted, smeared or merged. The sand layers protect the chalk surface from being cratered when you pour, which does the same damage in a different way.
วัสดุสำหรับขั้นตอนนี้:
แคลเซียมคาร์บอเนต (ผงชอล์ก)100 ก.
ทรายควอตซ์30 ก.
สำลีซับ1 แพ็คเครื่องมือที่ต้องใช้:
แท่งแก้วโบโรซิลิเกต3
3
Wet the column before you load it — never let it run dry
Wet the column before you load it — never let it run dry
Run solvent through until the whole packing is wetted and a few millimetres stand above the top sand. Keep it that way for the rest of the run.
A column that runs dry cracks, and a cracked column is finished — you cannot re-wet it back into a uniform bed. This is the single rule that decides whether the afternoon works. Set the solvent reservoir up so it keeps the level topped up rather than trusting yourself to notice.
วัสดุสำหรับขั้นตอนนี้:
อะซิโตน100 มล.เครื่องมือที่ต้องใช้:
บีกเกอร์โบโรซิลิเกต4
4
Load a narrow band, and let it sink in
Load a narrow band, and let it sink in
Let the solvent drain to exactly the top of the sand, then pipette your extract gently down the inside wall so it forms a thin, level layer. Let THAT drain in before adding any solvent.
The width of the band you start with is the width you are stuck with. Every separation that follows has to pull the components further apart than this starting smear, so a 2 mm load separates where a 2 cm load never will. This is the same discipline as a narrow spot in paper chromatography, and it matters more here because the column is longer.
เครื่องมือที่ต้องใช้:
ปิเปตต์มีขีดบอกปริมาตร (มอร์)5
5
Develop, and watch the green come apart
Develop, and watch the green come apart
Add solvent steadily and let it run. Over twenty minutes or so the single green band stretches, then splits: a yellow-orange band running ahead, then yellow-green, then blue-green behind.
Ahead are the carotenes, which barely stick to the chalk. Behind them the xanthophylls, which carry oxygen atoms and hold on harder. Last come chlorophyll a and then chlorophyll b, the most strongly held of all. You are watching a mixture sort itself by how tightly each molecule grips a surface — and this is exactly the argument Tsvet lost for thirty years.
วัสดุสำหรับขั้นตอนนี้:
อะซิโตน200 มล.เครื่องมือที่ต้องใช้:
บีกเกอร์โบโรซิลิเกต6
6
Collect the bands as separate fractions
Collect the bands as separate fractions
Put a fresh test tube under the outlet as each coloured band approaches, and change tubes as it passes. Cap and label each one.
This is the step that turns a pretty demonstration into chemistry. A band you watched is a picture; a band in a tube is a purified substance you can weigh, spectroscope, or run again. Tsvet's own word for the separated bands was 'zones', and collecting them is what earned the method its place when Kuhn and Lederer rediscovered it in the 1930s.
เครื่องมือที่ต้องใช้:
หลอดทดลอง (โบโรซิลิเกต)
ปิเปตต์มีขีดบอกปริมาตร (มอร์)7
7
Why the bands travel at different speeds
Why the bands travel at different speeds
กำลังโหลดสมุด Jupyter…
เครื่องมือที่ต้องใช้:
ไม้บรรทัด8
8
Change the solvent and watch the order hold
Change the solvent and watch the order hold
Run the column again with a solvent of different polarity — swap some of the acetone for a less polar solvent, or the reverse — and note what changes.
The bands move faster or slower, sometimes dramatically, but their ORDER stays the same, because the order is set by how strongly each pigment grips the chalk relative to the others. Solvent strength is your speed control; the stationary phase decides the sequence. Understanding which knob does which is the difference between tuning a separation and guessing at one.
วัสดุสำหรับขั้นตอนนี้:
ไอโซโพรพิลแอลกอฮอล์ 99 %100 มล.
อะซิโตน100 มล.เครื่องมือที่ต้องใช้:
บีกเกอร์โบโรซิลิเกตวัสดุ
7- 100 ก.ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- 30 ก.ตัวยึดตำแหน่ง
- ตัวยึดตำแหน่ง
- 1 แพ็คตัวยึดตำแหน่ง
- 400 มล.ตัวยึดตำแหน่ง
- 100 มล.ตัวยึดตำแหน่ง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


