ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่
Wooden Barrel: Bulged Oak Staves Bent by Fire, with Two Heads
Woody

สร้างโดย

Woody

14. ตุลาคม 2026NO
15
0
0
0
0

Wooden Barrel: Bulged Oak Staves Bent by Fire, with Two Heads

A barrel is the cooper's closed vessel: oak staves held by hoops, bulging at the middle, with flat heads set in grooves at both ends. Coopers heat the staves to bend them. Shape staves wider at the middle than the ends, raise them in a hoop, heat them over a small fire and draw the open end together, drive the hoops, and fit the heads. The picture: a new oak barrel in a cooper's workshop, with iron hoops on the floor.
ขั้นสูง
Several days

คำแนะนำ

1

Shape the staves

Rive and shave oak staves as for the vat, but taper each from the middle toward both ends, and hollow the inside face a little.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้เนื้อแข็งหนาแผ่นไม้เนื้อแข็งหนา8 ชิ้น

เครื่องมือที่ต้องใช้:

โฟร (มีดผ่าไม้)โฟร (มีดผ่าไม้)
ม้านั่งเหลาไม้ม้านั่งเหลาไม้
มีดสองมือมีดสองมือ
กบไสไม้กบไสไม้
2

Raise and fire

Stand the staves inside one hoop to form a skirt. Light a small charcoal fire inside, wet the outside, and as the staves warm, draw the open end together with a rope round it until a hoop can be driven on.

วัสดุสำหรับขั้นตอนนี้:

ถ่านไม้ถ่านไม้3 as required
น้ำน้ำ10 ลิตร

เครื่องมือที่ต้องใช้:

ห่วงเหล็กห่วงเหล็ก
เชือกรับแรงสูงเชือกรับแรงสูง
ค้อนหัวลิ่มขวางค้อนหัวลิ่มขวาง
ถุงมือกันความร้อนถุงมือกันความร้อน
3

Hoops

Drive the rest of the iron hoops on, two near each end and two at the quarters, until the joints close tight.

วัสดุสำหรับขั้นตอนนี้:

ห่วงเหล็กห่วงเหล็ก6 ชิ้น

เครื่องมือที่ต้องใช้:

ค้อนหัวลิ่มขวางค้อนหัวลิ่มขวาง
4

Ends and grooves

Level the ends and bevel the inside edge with the adze, then cut a groove round the inside near each end.

เครื่องมือที่ต้องใช้:

ขวานถากขวานถาก
ชุดสิ่วชุดสิ่ว
5

Heads and bung

Join planks into two boards, scribe circles to fit the grooves, cut and bevel them, slack the end hoops and spring the heads in. Bore a bung hole in the middle stave. Fill with water to swell it tight.

วัสดุสำหรับขั้นตอนนี้:

แผ่นไม้เนื้อแข็งหนาแผ่นไม้เนื้อแข็งหนา2 ชิ้น
น้ำน้ำ50 ลิตร

เครื่องมือที่ต้องใช้:

วงเวียนปลายแหลมสองขาวงเวียนปลายแหลมสองขา
เลื่อยมือเลื่อยมือ
กบไสไม้กบไสไม้
ค้อนหัวลิ่มขวางค้อนหัวลิ่มขวาง
สว่านมือสว่านมือ
6

Capacity of a barrel

กำลังโหลดสมุด Jupyter…

วัสดุ

4
  • ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง
  • 60 ลิตร
    ตัวยึดตำแหน่ง
  • ตัวยึดตำแหน่ง

เครื่องมือที่จำเป็น

13

พิมพ์เขียวนี้สร้าง

บลูพริ้นท์ที่เกี่ยวข้อง

บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ

CC0 สาธารณสมบัติ

พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต

สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้

การสนทนา

(0)

เข้าสู่ระบบ เพื่อร่วมการสนทนา

กำลังโหลดความคิดเห็น...