Kerjasama
SENI
KECANTIKAN & KESEJAHTERAAN
KRAFTANGAN
BUDAYA & SEJARAH
HIBURAN
ALAM SEKITAR
MAKANAN & MINUMAN
KEJURUTERAAN TERBALIK
SAINS
SUKAN
TEKNOLOGI
BOLEH PAKAI
Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Pemula
Unknown
Arahan
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
Bahan untuk langkah ini:
Bar Rata Keluli Lembut1 turning toolsAlatan diperlukan:
Gergaji Besi
Tukul
Andas
Kikir Logam2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
Bahan untuk langkah ini:
Papan pain1 board support
Pasak kayu1 turning stick
Paku Besi1 stick pointAlatan diperlukan:
Gergaji BesiKikir LogamTukul3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
Bahan untuk langkah ini:
Papan kayu keras1 ribsAlatan diperlukan:
Gergaji BesiKikir LogamBahan
5- 1 turning toolsPemegang Tempat
- 1 board supportPemegang Tempat
- 1 turning stickPemegang Tempat
- 1 stick pointPemegang Tempat
- 1 ribsPemegang Tempat
Bahan Blueprint Bersambung
10% Atribusi
Mild Steel Bar Stock Forged from an Ingot
oleh Forge
Moden
43
0
0
0
5
0
10% Atribusi
Pine Boards with a Chainsaw Mill
oleh Woody
Kerja Kayu
43
0
0
0
1
0
10% Atribusi
Riven Hardwood Dowels with a Dowel Plate
oleh Woody
Kerja Kayu
52
0
0
0
1
0
10% Atribusi
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
oleh Forge
Kuku
61
0
0
0
3
0
Blueprint ini membuat
CC0 Domain Awam
Blueprint ini dikeluarkan di bawah CC0. Anda bebas menyalin, mengubah, mengedar, dan menggunakan karya ini untuk sebarang tujuan, tanpa meminta kebenaran.
Sokong Pembuat dengan membeli produk melalui Blueprint mereka di mana mereka memperoleh Komisen Pembuat ditetapkan oleh Penjual, atau cipta iterasi baru Blueprint ini dan sertakan ia sebagai sambungan dalam Blueprint anda sendiri untuk berkongsi hasil.