IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Folding Slat-Box Dasher Churn: A Slatted Parallelogram That Folds to Squeeze the Cream
Clement came back three years after his V-bottom churn with a dasher that folds itself flat.
Edwin B. Clement of Barnet, Caledonia County, Vermont, received US 12,377, dated 13 February 1855, for a dasher that "will surround the cream and force it through spaces between the slats of the dasher by closing or folding together." Four arms carry four shafts at their ends; two arms have square holes for the crank shaft and two round holes for a rod; connecting bars fixed to the shafts join them; slats close the bottom and sides, and two slatted doors held by buttons close the top. Worked forward and back by the crank, "it will open and fold the dasher, and describe the inside of the vessel," whose shape follows the dasher's sweep.
This rung works out how much the box squeezes, then prints the arms, bars and bearings, builds the slatted dasher, and makes and washes butter.
Ilọsíwájú
About 6 hours, plus printing
Ìlànà
1
1
How much it squeezes
How much it squeezes
Ń ṣí ìwé Jupyter…
2
2
His own earlier churn
His own earlier churn
The embedded blueprint is Clement's 1852 dasher, whose floats close into a V to drive the cream up. In 1855 he folds a whole slatted box.
3
3
Read US 12,377
Read US 12,377
"Put in the cream and steadily move the crank forward and back. After the butter becomes separated from the milk, put all the butter into the dasher, draw off the butter milk, and put in a sufficient quantity of pure cold water, and operate as in churning and the butter will be completely washed and ready for the salt."
4
4
Print the parts
Print the parts
Print two arms with square centre holes (/uploads/blueprints/folding-slat-box-dasher-churn-arm-square.stl), two with round ones (/uploads/blueprints/folding-slat-box-dasher-churn-arm-round.stl), four connecting bars (/uploads/blueprints/folding-slat-box-dasher-churn-bar.stl), two bearing boxes (/uploads/blueprints/folding-slat-box-dasher-churn-bearing-box.stl) and two journal sleeves for the crank shaft (/uploads/blueprints/folding-slat-box-dasher-churn-journal-sleeve.stl). Print the arms and bars flat. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Okùn PETG1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìtẹ̀ 3D oníwàyà (FDM)5
5
The folding box
The folding box
Cut four 10 mm hardwood dowels 174 mm long as the shafts D. Put a square arm and a round arm at each end, the dowels' ends turning loosely in the arms' end holes, and glue a bar across each end of the top pair of dowels and of the bottom pair. Screw thin hardwood slats along the arms' outer edges and under the bottom bars, leaving gaps of about 5 mm, and make two slatted doors for the top, pinned to the top bars and held by turn buttons.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àwọn dowel igi líle1 ẹyọ
Ìdìpọ̀ Igi1 ẹyọ
Ìsúrù igi #8 x 1"1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn Ọwọ́
Ẹ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí Ìlùkòkò
Ìṣù àwọn ohun ìyí skurú
Bébà Ìfá6
6
Vessel, crank and rod
Vessel, crank and rod
Use a rectangular food-grade container about 260 by 180 mm and 230 mm deep, so the dasher's corners clear it when folded. Screw a bearing box outside each end wall, 100 mm apart, at the arms' pivots. Glue the journal sleeves on the ends of a 10 mm square hardwood crank shaft through the square holes, with a strip of spring steel in each box's slot as his spring P; push a 6 mm stainless rod through the other box and the round holes, and fit a crank arm and handle.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àgọ́ ìtọ́jú ti ìpele oúnjẹ1 ẹyọ
Ọ̀pá Róbótó Irin Rírọ̀1 ẹyọ
Ọ̀pá irin orísun1 ẹyọ
Pákó igi pine1 ẹyọÌsúrù igi #8 x 1"1 ẹyọ
Ìdílẹ̀ Silikoni1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ Ìlùkòkò Aláìlókùn
Ìṣètò ayùn ihò
Ayùn IrinÌṣù àwọn ohun ìyí skurú7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the vessel cut open, the dasher's two pairs of arms on the crank shaft and the rod, leaning part-way, with the four shafts, connecting bars and slats of the folding box.
8
8
Fold, then wash in the box
Fold, then wash in the box
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres and work the crank steadily forward and back; time until the butter comes. Open the doors, put the butter into the dasher, close them, draw off the buttermilk, pour in cold water and work it as before until the water runs clear; work in a pinch of salt and weigh the butter.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ọ̀rá wàrà tó nípọn2000 ml
Iyọ̀ Òkun Rúkèrúdò1 ẹyọ
Omi1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìwọ̀n ooru oníhun tí ó dúró sí inú
Aago Ìdúró
Òṣùwọ̀n Díjítà Ilé Ìdáná
Àwo ìdàpọ̀ ńlá ti irin tí kò ń yá9
9
A box that jams
A box that jams
Folding slat-box dasher troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Edwin B. Clement** of Barnet, Caledonia County, Vermont, received US 12,377, dated 13 February 1855; his earlier folding-float churn is US 8,671 of 1852. He bored the arms' holes "sufficiently large to receive the journals of the shafts ... and not swell and become tight when wet," and cut a thread on the rod to hold it. His vessel's ends are curved to the dasher's sweep. He claimed "the folding dasher operating as described."
**Honest limits.** A rectangular container stands in for his shaped vessel, and our sizes are ours. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Àwọn ohun-èlò
12- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 2 ẹyọÀyè
- Àyè
- Àyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 2000 mlÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
Àwọn irinṣẹ́ tó nílò
12- Àyè
- 1 vendor sell this, none ship to you yetÀyè
- Àyè
- Àyè
- Àyè
Àwọn fáìlì àpẹrẹ
1Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
Folding-Float V-Bottom Churn: Floats That Close Into a V on the Down-Stroke
láti ọwọ́ Woody
Iṣẹ́ Igi
23
0
0
0
0
0
Self-Folding Blade Dasher Churn: Six Blades to Churn, Reverse and They Fold to Two That Gather
láti ọwọ́ Woody
Iṣẹ́ Igi
28
0
0
0
0
0
Churning Butter from Cream — The 5,000-Year-Old Fat Separation
láti ọwọ́ TheChef
IṢẸ́ ỌWỌ́
49
0
0
0
0
0
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.