IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Self-Closing Float Dasher Churn: Floats That Open to Churn and Close to Gather
Davis wanted one dasher that would churn "in the most effectual manner," then gather the butter and work out the buttermilk.
Robert W. Davis of Rodgersville, New York, received US 7,233, dated 2 April 1850, for self-adjusting rotary churn-dashers. The dasher's fixed slats are set "at such angles as to force the cream toward the center"; movable floats hinged to its sides stand open when turning that way and move it outward, "which various and contrary motions so agitate it, that the butter is soon formed." Turned backward, the floats close on the slats so the outside forms "a uniform curve concentric to the axis," which throws the butter to the sides and bottom and presses it free of milk.
This rung looks at the floats' swing, then prints the sides, slats and floats, assembles the dasher in a box, and makes butter.
Àárín
About 4 hours, plus printing
Ìlànà
1
1
The floats' swing
The floats' swing
Ń ṣí ìwé Jupyter…
2
2
A dasher that churns one way and gathers the other before it
A dasher that churns one way and gathers the other before it
The embedded blueprint reverses fixed paired blades to roll the butter up. Davis lets hinged floats change shape by themselves when the crank is reversed.
3
3
Read US 7,233
Read US 7,233
"In order to gather the butter and work it, the dasher is then turned in the contrary direction, and the movable slats then closing the outside of the slats of the dasher form a uniform curve concentric to the axis and moving with the convex side foremost. By a few revolutions of the dasher the butter is thrown from the center to the sides and bottom of the churn box, and these gathered into a roll."
4
4
Print the parts
Print the parts
Print two side pieces (/uploads/blueprints/self-closing-float-dasher-churn-side.stl), four fixed slats (/uploads/blueprints/self-closing-float-dasher-churn-slat.stl), four curved floats with hinge eyes (/uploads/blueprints/self-closing-float-dasher-churn-float.stl) and the crank arm (/uploads/blueprints/self-closing-float-dasher-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Okùn PETG1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìtẹ̀ 3D oníwàyà (FDM)5
5
Assemble the dasher
Assemble the dasher
Slide the two side pieces onto a 10 mm square hardwood shaft 148 mm apart and screw the four slats between them. Hang each float between the arms' knuckles on a 3 mm stainless rod as its hinge, so it swings open one way and lies against its slat the other.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àwọn dowel igi líle1 ẹyọ
Ọ̀pá Róbótó Irin Rírọ̀1 ẹyọ
Skurú ẹ̀rọ1 ẹyọ
Ìdìpọ̀ Igi1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn Irin
Ìṣù àwọn ohun ìyí skurú
Ayùn Ọwọ́6
6
The box
The box
Take a food-safe box about 230 × 190 × 200 mm. Drill both ends on the axis 100 mm up, pass the shaft through with a leather washer at each end, and glue the crank arm and a dowel handle on.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àgọ́ ìtọ́jú ti ìpele oúnjẹ1 ẹyọ
Tẹ́ẹ́rẹ́ awọ1 ẹyọÌdìpọ̀ Igi1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí Ìlùkòkò7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the box with one side off to show the dasher's side pieces, the fixed slats and the hinged curved floats, and the crank.
8
8
Churn forward, gather backward
Churn forward, gather backward
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Crank forward, floats open; time until the butter comes. Then crank backward so the floats close and the round dasher gathers the butter into a roll; draw off the buttermilk and keep cranking to work it, as he did. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ọ̀rá wàrà tó nípọn1500 ml
Iyọ̀ Òkun Rúkèrúdò1 ẹyọ
Omi1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìwọ̀n ooru oníhun tí ó dúró sí inú
Aago Ìdúró
Òṣùwọ̀n Díjítà Ilé Ìdáná
Àwo ìdàpọ̀ ńlá ti irin tí kò ń yá9
9
Floats that won't open or close
Floats that won't open or close
Self-closing float dasher troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Robert W. Davis** of Rodgersville, Steuben County, New York, received US 7,233, dated 2 April 1850. His drawing shows the dasher in a churn box with slats D strengthening it. He claimed "the self adjusting float or slat (C) which opens when churning the cream and closes of itself when the dasher is turned in the opposite direction to gather the butter."
**Honest limits.** A food-safe box and printed parts stand in for his wooden box and dasher. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Àwọn ohun-èlò
10- 1 ẹyọÀyè
- 1 ẹyọÀyè
- Àyè
- 1 ẹyọÀyè
- 2 ẹyọÀyè
- Àyè
- 1 ẹyọÀyè
- 1500 mlÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
Àwọn irinṣẹ́ tó nílò
10- Àyè
- Àyè
- 1 vendor sell this, none ship to you yetÀyè
- Àyè
Àwọn fáìlì àpẹrẹ
1Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
Telegraph Beater Churn: Nested Knife-Edged Beaters That Whip the Cream
láti ọwọ́ Martin
OÚNJẸ ÀTI OHUN MÍMU
10
0
0
0
0
0
Centrifugal and Centripetal Churn Dasher: Paired Blades That Squeeze the Cream Through
láti ọwọ́ TheChef
OÚNJẸ ÀTI OHUN MÍMU
8
0
0
0
0
0
Shaftless Dasher-Wheel Churn: Bevelled Buckets Drive the Cream to the Centre
láti ọwọ́ Martin
OÚNJẸ ÀTI OHUN MÍMU
26
0
0
0
0
0
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.