IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
Spiral-Slide Egg Beater: Push a Slide, Two Scrolls Turn Opposite Ways
Two beaters turning opposite ways had needed gears or a rack.
Uriah Baker of Brooklyn received US 30,453, dated 23 October 1860, for an egg beater "arranging on one spindle two egg beaters, and operating them simultaneously in opposite directions, by means of independent worms or spiral threads or grooves attached to them, and an agitatory slide, working longitudinally on the spiral threads": pins on the slide turn the inner scroll one way and the outer the other as the slide is worked up and down.
This rung works out the turns per stroke, then prints two twisted bars of opposite hand and the slide's nuts, builds the spindle and scrolls, and times a beating.
Ilọsíwájú
About 4 hours, plus printing
Ìlànà
1
1
Turns per stroke
Turns per stroke
Ń ṣí ìwé Jupyter…
2
2
Two opposite beaters from one motion before it
Two opposite beaters from one motion before it
The embedded blueprint turns two pinions opposite ways with one rack. Baker does it with two spirals of opposite hand and one slide.
3
3
Read US 30,453
Read US 30,453
"The pin G, or other equivalent device on the upper end of the reciprocating agitatory slide H, engaging into grooves formed by the spiral wires E, while the pin I, or other equivalent device on the lower end of the slide H, engaging into the spiral C, rotates the scroll D, in a direct rotatory motion. By this compound action the two scrolls cut and beat the egg to pieces with great rapidity."
4
4
Print the spirals and nuts
Print the spirals and nuts
Print the right-hand twisted bar (/uploads/blueprints/spiral-slide-egg-beater-spiral-right.stl), the left-hand one (/uploads/blueprints/spiral-slide-egg-beater-spiral-left.stl) and two square-hole nuts (/uploads/blueprints/spiral-slide-egg-beater-nut.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Okùn PETG1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ ìtẹ̀ 3D oníwàyà (FDM)5
5
Spindle and inner scroll
Spindle and inner scroll
Epoxy the right-hand bar on a 240 mm rod of 5 mm steel, 60 mm from its foot. Bend two loops of stainless wire 24 mm across onto the rod's foot: the inner scroll.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ọ̀pá Róbótó Irin Rírọ̀1 ẹyọ
Okùn irin aláìjẹrùn1 ẹyọ
Ẹpọ́ksì Ẹ̀yà Méjì1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ayùn Irin
Ìdìmú Tábìlì
Ẹ̀mú Olórí Yíká
Ẹmú Ẹnu Pẹrẹsẹ6
6
Upper spiral and outer scroll
Upper spiral and outer scroll
Slide the left-hand bar on above it, free to turn, and stop it with a collar. Hang two wires from a disk on its top down past the slide, and bend them into an outer scroll 44 mm across round the inner one.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Okùn irin aláìjẹrùn1 ẹyọẸpọ́ksì Ẹ̀yà Méjì1 ẹyọ
Wáṣà Pẹrẹsẹ1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀mú Olórí YíkáẸmú Ẹnu Pẹrẹsẹ
Òṣùwọ̀n Kálípà Díjítà Ìnṣì 67
7
The slide
The slide
Epoxy the two nuts into the ends of a 92 mm tube, one on each bar, so the tube slides along both. Fix a hardwood knob on the spindle's top.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Àwọn dowel igi líle1 ẹyọẸpọ́ksì Ẹ̀yà Méjì1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Àwọn Ìfá (Ìfá Ọwọ́)
Ẹ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí Ìlùkòkò8
8
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the spindle with the right-hand bar fixed and the left-hand bar free, the slide with a square nut on each, the inner and outer scrolls, and the knob.
9
9
Beat egg whites
Beat egg whites
Hold the knob and work the slide up and down in a bowl of two egg whites; time to stiff peaks.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ẹyin2 ẹyọÀwọn irinṣẹ́ tí a nílò:
Àwo ìdàpọ̀ ńlá ti irin tí kò ń yá
Aago Ìdúró10
10
A slide that jams, scrolls that turn together
A slide that jams, scrolls that turn together
Spiral-slide egg beater troubleshooting.
Flow
Loading...
11
11
History and honest limits
History and honest limits
**Uriah Baker** of Brooklyn, Kings County, New York, received US 30,453, dated 23 October 1860. The lower spiral C is a permanent fixture on the spindle; the spiral E with the outer scroll F slides down onto the spindle and turns on it, kept by a shoulder; the inner scroll D is soldered to the spindle inside F; the slide is put on from the lower end and its pins inserted to engage the spirals.
**Honest limits.** FDM prints hold food in their layer lines, so wash well and replace when worn. Printed twisted bars and square nuts stand in for his spiral wires and pins. Your times are the result.
Àwọn ohun-èlò
7- 1 ẹyọÀyè
- Àyè
- 2 ẹyọÀyè
- 3 ẹyọÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
- 2 ẹyọÀyè
Àwọn irinṣẹ́ tó nílò
11- Àyè
- Àyè
- 1 vendor sell this, none ship to you yetÀyè
- Àyè
Àwọn fáìlì àpẹrẹ
1Ìtọ́nisọ́nà yìí ń ṣe
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
Oblique-Rack Egg Beater: One Rack Turns Two Beaters Opposite Ways
láti ọwọ́ Emma
OÚNJẸ ÀTI OHUN MÍMU
34
0
0
0
0
0
Counter-Rotating Egg Beater: One Wheel, Two Beaters Turning Opposite Ways
láti ọwọ́ Martin
OÚNJẸ ÀTI OHUN MÍMU
29
0
0
0
0
0
Ratchet-Bar Egg Beater: Push a Rack, the Floats Spin Both Ways
láti ọwọ́ YourGrandma
OÚNJẸ ÀTI OHUN MÍMU
29
0
0
0
0
0
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.