कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने
Barium-Calcium Ferrite Disc Magnet: 20 % Calcium, 5 Minutes at 1290 °C (Went, Philips 1956, Ex. 20)
Charlie

सिर्जनाकर्ता

Charlie

28. अक्टोबर 2026DE
१
०
०
०
०

Barium-Calcium Ferrite Disc Magnet: 20 % Calcium, 5 Minutes at 1290 °C (Went, Philips 1956, Ex. 20)

A ceramic magnet with a fifth of the barium replaced by calcium: 0.08 mol barium carbonate, 0.02 mol calcium carbonate and 0.6 mol iron oxide, made as in Example 18 but sintered at 1290 °C for only 5 minutes. Went's rod held 1,615 gauss with a coercive force of 1,550 oersted. Source: J. J. Went, G. W. van Oosterhout and E. W. Gorter (Philips), US 2,762,777 (1956), Example 20. They sintered rods; discs and the magnetising are ours. Picture: ferrite magnets, Omegatron, Wikimedia Commons, CC BY-SA 3.0.
उन्नत
2 days

निर्देशनहरू

1

Weigh barium carbonate, chalk and iron oxide

Weigh 15.79 g barium carbonate (0.08 mol), 2.002 g calcium carbonate (0.02 mol) and 95.55 g ferric oxide (0.6 mol). Barium carbonate is poisonous if swallowed: gloves and a dust respirator.

यस चरणका सामग्री:

ब्यारियम कार्बोनेट (विथराइट)ब्यारियम कार्बोनेट (विथराइट)15.79 ग्राम
क्याल्सियम कार्बोनेट (सेतो खरी)क्याल्सियम कार्बोनेट (सेतो खरी)2.002 ग्राम
फेरिक अक्साइडफेरिक अक्साइड95.55 ग्राम

चाहिने औजार:

समभुज तराजुसमभुज तराजु
रबरका पन्जारबरका पन्जा
P100 स्वास रक्षकP100 स्वास रक्षक
2

Mill, presinter and mill as in Example 18

As in Example 18: grind with alcohol 4 hours, dry at 150 °C, fire in air at 1000 °C for 2 hours, grind again 4 hours and dry.

चाहिने औजार:

फलामे बल मिलफलामे बल मिल
इथानोल - प्रयोगशाला श्रेणी, 95 %इथानोल - प्रयोगशाला श्रेणी, 95 %
सुकाउने भट्टीसुकाउने भट्टी
मफल भट्टीमफल भट्टी
बिर्कोसहितको क्रुसिबल (चिनियाँ माटो)बिर्कोसहितको क्रुसिबल (चिनियाँ माटो)
मुसाको चिम्टामुसाको चिम्टा
3

Press at 1.5 t/cm²

Press at 1.5 tonnes per cm², as in Example 18 (ours: discs instead of rods).

चाहिने औजार:

हाइड्रोलिक प्रेसहाइड्रोलिक प्रेस
डिस्क थिच्ने डाइडिस्क थिच्ने डाइ
4

Pass through a 1290 °C zone in 5 minutes

Sinter in air at 1290 °C by passing the pieces through a 10 cm hot zone at 20 mm per minute: 5 minutes in the heat.

चाहिने औजार:

ट्युब फर्नेसट्युब फर्नेस
ताप सहने पन्जाताप सहने पन्जा
5

Magnetise the discs

The patent gives no magnetising method. Ours: lay a disc with its faces against the poles of a strong electromagnet, switch the current on, then off. Find which face is north with a compass.

चाहिने औजार:

विद्युत् चुम्बकविद्युत् चुम्बक
दिशासूचक यन्त्रदिशासूचक यन्त्र

सामग्री

3

आवश्यक उपकरणहरू

15

सम्बन्धित ब्लुप्रिन्ट

यी ब्लुप्रिन्टहरूले ज्ञान साझा गर्छन् — प्रविधि, सामग्री वा सिद्धान्त

CC0 सार्वजनिक डोमेन

यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।

ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

छलफल

(0)

लग इन छलफलमा सामेल हुन

टिप्पणीहरू लोड गर्दै...