सहयोग
कला
सुन्दरता र कल्याण
हस्तकला
संस्कृति र इतिहास
मनोरञ्जन
वातावरण
खाना र पेय
रिभर्स इन्जिनियरिङ
विज्ञान
खेलकुद
प्रविधि
पहिर्न मिल्ने
Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)
Forge

सिर्जनाकर्ता

Forge

4. नोभेम्बर 2026NO
१३
०
०
१
०

Teapot: a Tinplate Picnic Teapot with Cock and Strainer (Hasluck, 1907)

A square tinplate teapot from a picnic outfit: folded from one blank, with a hinged lid, and a cock at the bottom behind a perforated strainer that holds back the leaves. Blank 1 ft 4 1/4 in by 1 ft 0 3/8 in; lid 4 1/8 by 4 in. Source: Paul N. Hasluck, Tinplate Work (1907), pp. 37-39. Unknown: folding order, solder, the cock. Picture: Figs. 96-97 of the book.
मध्यम
Unknown

निर्देशनहरू

1

Cut the body blank

Cut a piece of tin 1 ft 4 1/4 in long by 1 ft 0 3/8 in wide and mark the pattern of Fig. 96 on it, with the hole for the cock tube. Not given: the folding order. Ours: bend it up on the dotted lines and solder the seams.

यस चरणका सामग्री:

टिन लेपित पाताटिन लेपित पाता1 body
टिन-सिसाको टाँकाटिन-सिसाको टाँका1 टुक्रा

चाहिने औजार:

धर्को तान्ने सियोधर्को तान्ने सियो
पाता काट्ने कैँचीपाता काट्ने कैँची
खुँटोखुँटो
काठको मुङ्ग्रोकाठको मुङ्ग्रो
बिजुली सोल्डरिङ आइरनबिजुली सोल्डरिङ आइरन
फ्लक्सफ्लक्स
2

Fit the cock and strainer

Solder a tube about 1/2 in long into the hole for the cock (Fig. 97) and fit the cock to it. Develop the strainer (Fig. 98): top curve radius 1 13/16 in, chord corner to corner 2 15/16 in. Perforate it and solder it across the corner in front of the tube (Fig. 99).

यस चरणका सामग्री:

पित्तलको नलीपित्तलको नली1 1/2 in
निकास धारानिकास धारा1 टुक्रा
टिन लेपित पाताटिन लेपित पाता1 strainer
टिन-सिसाको टाँकाटिन-सिसाको टाँका1 टुक्रा

चाहिने औजार:

दुई टुप्पे कम्पासदुई टुप्पे कम्पास
पाता काट्ने कैँचीपाता काट्ने कैँची
पाता प्वाल पार्ने पन्चपाता प्वाल पार्ने पन्च
कडा काठको ढिक्काकडा काठको ढिक्का
बिजुली सोल्डरिङ आइरनबिजुली सोल्डरिङ आइरन
फ्लक्सफ्लक्स
3

Make the hinged lid

Cut the lid (Fig. 100) 4 1/8 by 4 in; the inner rectangle 3 1/2 by 3 1/2 in leaves 1/4 in to bend up. Cut hinge projections 1/2 in wide by 5/8 in deep with equal spaces, the outer ones only 1/4 in wide. Bend them round a wire 1/16 in thick. Hasluck adds that the teapot may be enamelled dark green.

यस चरणका सामग्री:

टिन लेपित पाताटिन लेपित पाता1 lid
फलामे तारफलामे तार1 1/16 in

चाहिने औजार:

पाता काट्ने कैँचीपाता काट्ने कैँची
खुँटोखुँटो
काठको मुङ्ग्रोकाठको मुङ्ग्रो

सामग्री

5

आवश्यक उपकरणहरू

9

CC0 सार्वजनिक डोमेन

यो ब्लुप्रिन्ट CC0 अन्तर्गत जारी गरिएको छ। तपाईं अनुमति नसोधी प्रतिलिपि, परिमार्जन, वितरण र प्रयोग गर्न सक्नुहुन्छ।

ब्लुप्रिन्ट मार्फत उत्पादनहरू किनेर सिर्जनाकर्तालाई सहयोग गर्नुहोस् सिर्जनाकर्ता कमिसन विक्रेताले तोकेको, वा यो ब्लुप्रिन्टको नयाँ संस्करण बनाउनुहोस् र आम्दानी बाँड्न आफ्नो ब्लुप्रिन्टमा जडानको रूपमा समावेश गर्नुहोस्।

छलफल

(0)

लग इन छलफलमा सामेल हुन

टिप्पणीहरू लोड गर्दै...