Pakikipagtulungan
SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Baguhan
Unknown
Mga Tagubilin
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
Mga materyales para sa hakbang na ito:
Patag na Baras na Malambot na Asero1 turning toolsMga kailangang kasangkapan:
Lagaring Pang-metal
Martilyo
Palihan
Kikil na Pang-metal2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
Mga materyales para sa hakbang na ito:
Tablang pino1 board support
Pasak na kahoy1 turning stick
Pakong Bakal1 stick pointMga kailangang kasangkapan:
Lagaring Pang-metalKikil na Pang-metalMartilyo3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
Mga materyales para sa hakbang na ito:
Tabla ng matigas na kahoy1 ribsMga kailangang kasangkapan:
Lagaring Pang-metalKikil na Pang-metalMga Materyales
5- 1 turning toolsPlaceholder
- 1 board supportPlaceholder
- 1 turning stickPlaceholder
- 1 stick pointPlaceholder
- Placeholder
Mga Materyales ng Nakakonektang Blueprint
10% Atribusyon
Mild Steel Bar Stock Forged from an Ingot
ni Forge
Moderno
43
0
0
0
5
0
10% Atribusyon
Pine Boards with a Chainsaw Mill
ni Woody
Paggawa ng Kahoy
43
0
0
0
1
0
10% Atribusyon
Riven Hardwood Dowels with a Dowel Plate
ni Woody
Paggawa ng Kahoy
52
0
0
0
1
0
10% Atribusyon
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
ni Forge
Mga Pako
61
0
0
0
3
0
Ang blueprint na ito ay gumagawa ng
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.