SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Double-Concave Perforated Disk Dasher: Two Tin Domes With Half-Covered Holes
Marsh improved the dasher of "the plain old-fashioned churns so long used by farmers generally."
Joseph Marsh of Petersburg, Menard County, Illinois, received US 7,527, dated 30 July 1850, for a "double-concave perforated discoid churn-dasher": two convex pieces of tin or other suitable material, "perforated and placed on the upright," about six inches across with holes about three-quarters of an inch, "the several holes in B made to cover about half of the several holes in C." It works in a straight-sided churn by raising and pushing it, or by a lever.
This rung works out the open area, then prints the two domes and spacer, fits them to a staff, and makes butter.
Baguhan
About 1 hour, plus printing
Mga Tagubilin
1
1
Half-covered holes
Half-covered holes
Naglo-load ng Jupyter notebook…
2
2
An improved common dasher before it
An improved common dasher before it
The embedded blueprint improves the common dasher with pitched oars. Marsh uses two perforated domes whose holes half overlap.
3
3
Read US 7,527
Read US 7,527
"The convex pieces of tin, as shown at B and C, are or may be six inches in diameter, and the several holes in the same about three-quarters of an inch in diameter, the several holes in B made to cover about half of the several holes in C."
4
4
Print the domes
Print the domes
Print the two domes (/uploads/blueprints/double-concave-perforated-disk-dasher-disk-a.stl and /uploads/blueprints/double-concave-perforated-disk-dasher-disk-b.stl): 152 mm across with 19 mm holes, the second turned so its holes half cover the first's. Print the spacer ring (/uploads/blueprints/double-concave-perforated-disk-dasher-ring.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Mga materyales para sa hakbang na ito:
PETG filament1 pirasoMga kailangang kasangkapan:
Limbagang 3D na FDM5
5
Assemble
Assemble
Glue the two domes back to back on the spacer ring, convex sides out, holes half overlapping, and glue them on the foot of a 12 mm hardwood dowel staff.
Mga materyales para sa hakbang na ito:
Mga tarugong matigas na kahoy1 piraso
Epoksing dalawang bahagi1 pirasoMga kailangang kasangkapan:
Lagaring Pangkamay
Papel de Liha6
6
The churn
The churn
Use a straight-sided food-grade container about 160 mm across and 300 mm tall, so the dasher fits closely without rubbing, as he said. Drill its lid for the staff.
Mga materyales para sa hakbang na ito:
Sisidlan ng imbakan na antas pagkain1 pirasoMga kailangang kasangkapan:
Walang-Kableng Barena
Set ng hole saw7
7
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the straight-sided churn cut away to show the two perforated domes back to back on the staff, and a lever.
8
8
Dash and make butter
Dash and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres. Work the staff up and down; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Mga materyales para sa hakbang na ito:
Makapal na krema2000 ml
Magaspang na Asin sa Dagat1 piraso
Tubig1 pirasoMga kailangang kasangkapan:
Termometro na naiiwang nakatusok
Panukat ng Oras
Digital na Timbangang Pangkusina
Malaking mangkok na panghalo na asero na hindi kinakalawang9
9
A dasher that sticks or splashes
A dasher that sticks or splashes
Double-concave disk dasher troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**Joseph Marsh** of Petersburg, Menard County, Illinois, received US 7,527, dated 30 July 1850. He wrote that it creates "a suction of atmosphere through the milk ... that excels any improvement in churns of ancient or modern invention"; that is his claim. His churn was straight inside "instead of cone-shaped." He claimed the double-concave perforated discoid churn-dasher.
**Honest limits.** Printed domes stand in for his tin. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Mga Materyales
7- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
- Placeholder
- 2000 mlPlaceholder
- 1 pirasoPlaceholder
- 1 pirasoPlaceholder
Mga Kinakailangang Kasangkapan
9- Placeholder
- Placeholder
- Placeholder
- 1 vendor sell this, none ship to you yetPlaceholder
- Placeholder
- Placeholder
- Placeholder
- Placeholder
Mga design file
1Ang blueprint na ito ay gumagawa ng
Kaugnay na Blueprint
Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo
Reacting Churn Dasher: Two Rows of Oars Pitched Opposite Ways
ni TheChef
PAGKAIN AT INUMIN
35
0
0
0
0
0
Valved Hollow-Staff Plunger Churn: A Valve at the Top, Air Forced Out at the Foot
ni TheChef
PAGKAIN AT INUMIN
33
0
0
0
0
0
Valveless Cone Air Dasher: A Hollow Cone and Four Tubes, Nothing to Wear Out
ni YourGrandma
PAGKAIN AT INUMIN
32
0
0
0
0
0
CC0 Pampublikong Domain
Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.
Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.