SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Quarter-Twist Spiral Dash Churn: Wings Twisted Between Arms Set at Right Angles
Woody

Nilikha ni

Woody

6. Oktubre 2026NO
16
0
0
0
0

Quarter-Twist Spiral Dash Churn: Wings Twisted Between Arms Set at Right Angles

The Hights made the wings of a horizontal box-churn dash into a screw. Cornelius R. Hight and John Hight of Geneva, Illinois, received US 7,490, dated 9 July 1850, for a "reacting spiral revolving dash" in a box churn: a shaft with four arms, those at one end at right angles to those at the other, and two wings fastened from arm to arm "so as to produce a quarter twist in the wings as they extend along the shaft." Its revolution produces "opposite currents, in the cream"; reversed, "the butter collects at the ends of the wings." This rung works out the wings' pitch, then prints the dash in one piece, fits it in a box, and makes butter.
Katamtaman
About 3 hours, plus printing

Mga Tagubilin

1

The quarter twist

Naglo-load ng Jupyter notebook…
2

Oblique wings on a horizontal arbor before it

The embedded blueprint sets straight wings at 30° to the axle. The Hights twist theirs a quarter turn from end to end, like a screw.
3

Read US 7,490

"The peculiar construction of the dash, consists in setting the arms to which the wings are attached, at right angles, upon opposite sides of the shaft, so as to produce a quarter twist in the wings as they extend along the shaft from one arm to the other."
4

Print the dash

Print the dash on end in one piece with supports (/uploads/blueprints/quarter-twist-spiral-dash-churn-dash.stl): shaft, four arms and two wings each twisted a quarter turn. Print the crank arm (/uploads/blueprints/quarter-twist-spiral-dash-churn-crank-arm.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Mga materyales para sa hakbang na ito:

PETG filamentPETG filament1 piraso

Mga kailangang kasangkapan:

Limbagang 3D na FDMLimbagang 3D na FDM
5

Fit the box

Take a food-safe box about 220 × 150 × 160 mm, its proportions close to his 18 × 12 × 13 inches. Drill both ends on the axis 80 mm up. Push a 10 mm square hardwood shaft through one end, the dash and the other end, with a leather washer at each.

Mga materyales para sa hakbang na ito:

Sisidlan ng imbakan na antas pagkainSisidlan ng imbakan na antas pagkain1 piraso
Mga tarugong matigas na kahoyMga tarugong matigas na kahoy1 piraso
Guhit na balatGuhit na balat1 piraso

Mga kailangang kasangkapan:

Walang-Kableng BarenaWalang-Kableng Barena
Hanay ng Talim ng BarenaHanay ng Talim ng Barena
Lagaring PangkamayLagaring Pangkamay
6

Crank and lid

Glue the crank arm and a dowel handle on the shaft's outer end, and fit the box's lid, as his rabbeted cover.

Mga materyales para sa hakbang na ito:

Mga tarugong matigas na kahoyMga tarugong matigas na kahoy1 piraso
Pandikit sa KahoyPandikit sa Kahoy1 piraso

Mga kailangang kasangkapan:

Papel de LihaPapel de Liha
7

The patent drawing

US 7,490 drawing sheet, public domain (expired patent).
Hakbang 7 - Image 1
8

Churn, then reverse to collect

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Crank steadily; time until the butter comes. Then reverse the crank so the butter collects at the ends of the wings, as they said. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

Mga materyales para sa hakbang na ito:

Makapal na kremaMakapal na krema1500 ml
Magaspang na Asin sa DagatMagaspang na Asin sa Dagat1 piraso
TubigTubig1 piraso

Mga kailangang kasangkapan:

Termometro na naiiwang nakatusokTermometro na naiiwang nakatusok
Panukat ng OrasPanukat ng Oras
Digital na Timbangang PangkusinaDigital na Timbangang Pangkusina
Malaking mangkok na panghalo na asero na hindi kinakalawangMalaking mangkok na panghalo na asero na hindi kinakalawang
9

Wings that scrape, butter that won't collect

Quarter-twist spiral dash troubleshooting.

Flow

Loading...
10

History and honest limits

**Cornelius R. Hight and John Hight** of Geneva, Kane County, Illinois, received US 7,490, dated 9 July 1850. Their wings could be wood or tin, split into the arms with a saw and fastened with brads or small screws; the wing's inner border was cut to arcs of 16- and 23-inch circles; the dash ran on a coupling gudgeon in a cast box and a screw pivot. They wrote it made butter "in from 5 to 8 minutes"; that is their claim, not our measurement. They claimed the application of a reacting spiral revolving dash to a box churn or any of the usual forms of churns. **Honest limits.** A food-safe box and a printed dash stand in for theirs, and our wings twist evenly rather than following their curved borders. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

Mga Materyales

8

Mga Kinakailangang Kasangkapan

9

Ang blueprint na ito ay gumagawa ng

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...