SINING
BEAUTY AT WELLNESS
CRAFTS
KULTURA AT KASAYSAYAN
LIBANGAN
KAPALIGIRAN
PAGKAIN AT INUMIN
REVERSE ENGINEERING
AGHAM
ISPORTS
TEKNOLOHIYA
MGA WEARABLE
Twin-Cylinder Tube-Link Churn: Two Churns Pumped Into Each Other Through a Tube
Daniel Fisher, College Corner, Ohio · Public domain (expired patent)
Karen

Nilikha ni

Karen

6. Oktubre 2026SE
32
0
0
0
0

Twin-Cylinder Tube-Link Churn: Two Churns Pumped Into Each Other Through a Tube

Fisher knew double dasher churns already existed, so he claimed only what joined his two. Daniel Fisher of College Corner, Ohio, received US 7,870, dated 1 January 1851, for "connecting two vertical churns by a horizontal tube at their bottoms ... (said tube being about ten inches long, and about one fifth of the capacity of one of the vertical cylinders) in combination with the perforated cutters E E." A lever on an upright between the cylinders works perforated plungers on two rods; the cream is "alternately forced through the openings in the segmental slides E and those in the pistons." This rung checks the tube's proportion, then prints the tube, slides and plungers, joins two pots, and makes butter.
Katamtaman
About 4 hours, plus printing

Mga Tagubilin

1

The tube's proportion

Naglo-load ng Jupyter notebook…
2

Two plungers driving cream between chambers before it

The embedded blueprint drives cream through a middle chamber. Fisher's two churns are joined by a tube that fills with air.
3

Read US 7,870

"The perforated cutters answer the double purpose of cutting the cream in its passage to and fro and only allowing sufficient cream to enter through the perforations at each stroke of the dashers to keep the tube half full or thereabout, thereby creating a partial vacuum in the tube, which becomes filled with air."
4

Print the parts

Print the link tube with its flanges (/uploads/blueprints/twin-cylinder-tube-link-churn-link-tube.stl), two perforated segmental slides (/uploads/blueprints/twin-cylinder-tube-link-churn-segmental-slide.stl) and two perforated plungers (/uploads/blueprints/twin-cylinder-tube-link-churn-plunger.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Mga materyales para sa hakbang na ito:

PETG filamentPETG filament1 piraso

Mga kailangang kasangkapan:

Limbagang 3D na FDMLimbagang 3D na FDM
5

Join the pots

Take two straight-sided food-safe containers about 110 mm across. Drill each low in its side for the tube, push the tube's ends through and seal the flanges with silicone. Glue two thin plywood strips inside each pot either side of the opening as grooves, and slide a perforated slide down them over the tube's mouth. Stand both on a pine plank.

Mga materyales para sa hakbang na ito:

Sisidlan ng imbakan na antas pagkainSisidlan ng imbakan na antas pagkain2 piraso
Silicone SealantSilicone Sealant1 piraso
Plantsa ng playwudPlantsa ng playwud1 piraso
Tablang pinoTablang pino1 piraso

Mga kailangang kasangkapan:

Set ng hole sawSet ng hole saw
Walang-Kableng BarenaWalang-Kableng Barena
Lagaring PangkurbaLagaring Pangkurba
6

Lever and plungers

Screw a pine upright to the plank between the pots, rising above them, and pivot a pine lever on its top. Glue a 12 mm dowel rod in each plunger and join each to the lever on a loose screw, equally either side of the pivot.

Mga materyales para sa hakbang na ito:

Tablang pinoTablang pino1 piraso
Mga tarugong matigas na kahoyMga tarugong matigas na kahoy1 piraso
Mga turnilyo ng makinaMga turnilyo ng makina1 piraso
Tuerkang HeksagonalTuerkang Heksagonal1 piraso
Pandikit sa KahoyPandikit sa Kahoy1 piraso
Turnilyong pangkahoy #8 x 1"Turnilyong pangkahoy #8 x 1"1 piraso

Mga kailangang kasangkapan:

Lagaring PangkamayLagaring Pangkamay
Walang-Kableng BarenaWalang-Kableng Barena
Hanay ng Talim ng BarenaHanay ng Talim ng Barena
Set ng mga distornilyadorSet ng mga distornilyador
7

The patent drawing

US 7,870 drawing sheet, public domain (expired patent).
Hakbang 7 - Image 1
8

Pump and make butter

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour 1 litre into each pot. Work the lever up and down like a pump handle; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

Mga materyales para sa hakbang na ito:

Makapal na kremaMakapal na krema2000 ml
Magaspang na Asin sa DagatMagaspang na Asin sa Dagat1 piraso
TubigTubig1 piraso

Mga kailangang kasangkapan:

Termometro na naiiwang nakatusokTermometro na naiiwang nakatusok
Panukat ng OrasPanukat ng Oras
Digital na Timbangang PangkusinaDigital na Timbangang Pangkusina
Malaking mangkok na panghalo na asero na hindi kinakalawangMalaking mangkok na panghalo na asero na hindi kinakalawang
9

Leaks at the tube, a lever that sticks

Twin-cylinder tube-link troubleshooting.

Flow

Loading...
10

History and honest limits

**Daniel Fisher** of College Corner, Butler County, Ohio, received US 7,870, dated 1 January 1851. His cylinders stood on a horizontal plank with movable covers tied together at top; he explained the butter by "the oxygen of the atmosphere"; that is his account. **Honest limits.** Our tube is far smaller than his one fifth, as the notebook shows; printed parts and food-safe pots stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

Mga Materyales

13

Mga Kinakailangang Kasangkapan

11

Ang blueprint na ito ay gumagawa ng

Thumbnail
Placeholder

Panghalo ng mantikilya

Free

17
0

Kaugnay na Blueprint

Ang mga blueprint na ito ay nagbabahagi ng kaalaman — mga teknik, materyales, o prinsipyo

Double-Dasher Lever Churn: Swing One Lever, One Dasher Rises as the Other Falls

Double-Dasher Lever Churn: Swing One Lever, One Dasher Rises as the Other Falls

ni WoodyNO

Paggawa ng Kahoy

34
0
0
0
0
0
Interraking Plunger Churn: Two Rakes Worked Oppositely by a Double Crank

Interraking Plunger Churn: Two Rakes Worked Oppositely by a Double Crank

ni MartinNO

PAGKAIN AT INUMIN

21
0
0
0
0
0
Twin-Plunger Air-Chamber Churn: Two Plungers Throw the Cream Through a Middle Chamber

Twin-Plunger Air-Chamber Churn: Two Plungers Throw the Cream Through a Middle Chamber

ni EmmaSE

PAGKAIN AT INUMIN

29
0
0
0
0
0

CC0 Pampublikong Domain

Ang blueprint na ito ay inilabas sa ilalim ng CC0. Malaya kang kumopya, magbago, mamahagi, at gumamit nang walang pahintulot.

Suportahan ang Maker sa pamamagitan ng pagbili ng mga produkto sa kanilang Blueprint Komisyon ng Maker itinakda ng mga Vendor, o lumikha ng bagong bersyon ng Blueprint na ito at isama bilang koneksyon sa iyong Blueprint upang ibahagi ang kita.

Talakayan

(0)

Mag-login upang sumali sa talakayan

Naglo-load ng mga komento...