فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
Partition Air-Tube Plunger Churn: Cream Rushing Through Branch Tubes Draws Air Down
Emma

تخلیق کار

Emma

6. اکتوبر 2026SE
33
0
0
0
0

Partition Air-Tube Plunger Churn: Cream Rushing Through Branch Tubes Draws Air Down

O'Neil used the rush of the cream itself to draw air into it. John O'Neil of Xenia, Ohio, received US 7,531, dated 30 July 1850, for an atmospheric churn: a box divided by a movable partition with its lower edge perforated; an air tube down the partition with a bowl at its top, in the lid, holding a spring-closed hinged valve; a horizontal tube at its foot and branch tubes through the partition's lower edge, which "serve the double purpose of breaking the cream as it passes through and of communicating the current of atmosphere to the opposite apartment." Two plungers on a rocking lever, one cut to pass over the air tube, work oppositely. This rung estimates the suction, then prints the partition with its tubes, the valve bowl and the plungers, builds the box and lever, and makes butter.
اعلیٰ
About 5 hours, plus printing

ہدایات

1

The suction

Jupyter نوٹ بک لوڈ ہو رہی ہے…
2

Two plungers forcing cream through holes before it

The embedded blueprint throws cream between three chambers. O'Neil uses two, and lets the cream's rush through branch tubes draw air down an air tube.
3

Read US 7,531

"The depression of one, and the same time the elevation of the other causes the cream to be violently rushed through the horizontal tubes d, d, and the holes in the partition from one apartment to the other alternately. The passage of the cream through the tubes d, d, causes a suction of the atmosphere down the pipe b, through the horizontal part of the tube c, to d, d, and thence to the body of cream in each apartment."
4

Print the parts

Print the partition with its air tube, foot tube and branches in one piece, with supports. Blow through the tube's top to check air comes out of both branches. Print the valve bowl, one plunger and one notched plunger. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

اس مرحلے کے لیے مواد:

PETG فلامنٹPETG فلامنٹ1 ٹکڑا

درکار اوزار:

تار والا 3D پرنٹر (FDM)تار والا 3D پرنٹر (FDM)
5

Print the partition with its air tube, foot tube and branches

The partition with its air tube, foot tube and branches, printed as step 4 describes.
ڈیزائن فائلSTLCC0 - Free
6

Print the valve bowl

The valve bowl, printed as step 4 describes.
ڈیزائن فائلSTLCC0 - Free
7

Print the plunger

The plunger, printed as step 4 describes.
ڈیزائن فائلSTLCC0 - Free
8

Print the notched plunger

The notched plunger, printed as step 4 describes.
ڈیزائن فائلSTLCC0 - Free
9

Box, partition and valve

Take a food-safe box about 220 × 120 × 180 mm and fit two plywood strips inside the long sides at the middle as grooves, so the partition slides in and out. Drill the lid over the air tube's top and seat the bowl's spigot onto the tube through it. Hinge a small leather flap on the bowl's seat with a light spring, as his, so air passes down but cream cannot rise.

اس مرحلے کے لیے مواد:

غذائی درجے کا ذخیرے کا برتنغذائی درجے کا ذخیرے کا برتن1 ٹکڑا
پلائی ووڈ کی چادرپلائی ووڈ کی چادر1 ٹکڑا
چمڑے کی پٹیچمڑے کی پٹی1 ٹکڑا
سلیکون سیلنٹسلیکون سیلنٹ1 ٹکڑا

درکار اوزار:

گھما دار آریگھما دار آری
بے تار مشقبے تار مشق
مشقوں کا سیٹمشقوں کا سیٹ
10

Plungers and lever

Glue a 12 mm hardwood dowel rod in each plunger, the notched one on the side of the air tube. Screw a pine standard to each side of the box at the middle, pass a dowel axle through them and a pine lever, and join each rod to the lever on a loose screw.

اس مرحلے کے لیے مواد:

سخت لکڑی کی کھونٹیاںسخت لکڑی کی کھونٹیاں1 ٹکڑا
چیڑ کا تختہچیڑ کا تختہ1 ٹکڑا
مشینی پیچمشینی پیچ1 ٹکڑا
چھ گوشہ ڈھبریچھ گوشہ ڈھبری1 ٹکڑا
لکڑی کا گوندلکڑی کا گوند1 ٹکڑا
لکڑی کا پیچ #8 × ۱ انچلکڑی کا پیچ #8 × ۱ انچ1 ٹکڑا

درکار اوزار:

ہاتھ کی آریہاتھ کی آری
بے تار مشقبے تار مشق
مشقوں کا سیٹمشقوں کا سیٹ
پیچ کس سیٹپیچ کس سیٹ
11

The patent drawing

US 7,531 drawing sheet, public domain (expired patent).
قدم 11 - Image 1
12

Rock and make butter

Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres. Rock the lever briskly; bubbles should come from the branch tubes. Time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.

اس مرحلے کے لیے مواد:

گاڑھی بالائیگاڑھی بالائی1500 ملی لیٹر
موٹا سمندری نمکموٹا سمندری نمک1 ٹکڑا
پانیپانی1 ٹکڑا

درکار اوزار:

اندر رہنے والی سلاخ والا ترمامیٹراندر رہنے والی سلاخ والا ترمامیٹر
اسٹاپ واچاسٹاپ واچ
ڈیجیٹل باورچی خانہ ترازوڈیجیٹل باورچی خانہ ترازو
زنگ نہ لگنے والے فولاد کا بڑا ملانے کا پیالہزنگ نہ لگنے والے فولاد کا بڑا ملانے کا پیالہ
13

No air, cream in the bowl

Partition air-tube churn troubleshooting.

Flow

Loading...
14

History and honest limits

**John O'Neil** of Xenia, Greene County, Ohio, received US 7,531, dated 30 July 1850. His plungers had parts of two sides cut away, leaving about 1½ inches at each corner, "for the purpose of gathering the butter above the dasher." He claimed the construction of the air tubes in combination with the plungers and partition. **Honest limits.** Printed parts and a food-safe box stand in for his; the notebook's pressure drop is a rough estimate. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.

مواد

14

درکار اوزار

10

ڈیزائن فائلیں

4

CC0 پبلک ڈومین

یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔

میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔

بحث

(0)

لاگ ان بحث میں شامل ہونے کے لیے

تبصرے لوڈ ہو رہے ہیں...