فن
خوبصورتی اور تندرستی
دستکاری
ثقافت اور تاریخ
تفریح
ماحول
خوراک اور مشروبات
ریورس انجینئرنگ
سائنسز
کھیل
ٹیکنالوجی
پہننے والے آلات
Revolving-Drum Toothed-Bar Churn: The Churn Turns Round a Fixed Toothed Bar
Clarke turned the churn itself and held the beater still.
George B. Clarke of Leonardsville, New York, received US 8,373, dated 23 September 1851, for "Clarke's excelsior churn": a cylinder hung horizontally and revolving on fixed axles, with cleats inside, "either with or without projections," working between teeth on a stationary cross bar fixed to the axles a little off centre, to "break the circular motion of the milk and thereby cause it to be precipitated on the cylinder at the center." A stationary metal cylinder inside, fed warm or cold water through tubes in the hollow axles by a pump worked from the churn, tempers the milk; funnels in the axles let air in.
This rung works out the speed limit, then prints the cleats, toothed bar and axle blocks, builds the drum on a frame, and makes butter.
اعلیٰ
About 6 hours, plus printing
ہدایات
1
1
How fast to turn
How fast to turn
Jupyter نوٹ بک لوڈ ہو رہی ہے…
2
2
A churn that turns round still arms before it
A churn that turns round still arms before it
The embedded blueprint spins a drum against arms held still by a hook. Clarke's drum turns slowly round a fixed toothed bar, and tempers the milk from inside.
3
3
Read US 8,373
Read US 8,373
"The nature of my invention consists in hanging the body of the churn horizontally and causing it to revolve on fixed or permanent axles through which at either end are branch tubes connected to a stationary cylinder within the body serving (if required) by the passage of warm or cold fluid through them, to temper the milk."
4
4
Print the parts
Print the parts
Print four cleats with pins, the toothed cross bar and two axle blocks. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
اس مرحلے کے لیے مواد:
PETG فلامنٹ1 ٹکڑادرکار اوزار:
تار والا 3D پرنٹر (FDM)5
5
Print the cleat
6
6
Print the toothed cross bar
Print the toothed cross bar
The toothed cross bar, printed as step 4 describes.
7
7
Print the axle block
Print the axle block
The axle block, printed as step 4 describes.
8
8
The drum
The drum
Use a round food-grade container about 200 mm across as the drum. Screw the cleats inside, lengthwise, at equal spacing. Cut a hinged door in its side as his lid E. Drill both ends at the centre for 25 mm hollow axles of food-grade pipe, sealed to turn in leather washers, so the drum turns on them.
اس مرحلے کے لیے مواد:
غذائی درجے کا ذخیرے کا برتن1 ٹکڑا
پی وی سی پائپ1 ٹکڑا
چمڑے کی پٹی1 ٹکڑا
لکڑی کا پیچ #8 × ۱ انچ1 ٹکڑادرکار اوزار:
ہول سا کا سیٹ
بے تار مشق
گھما دار آری
پیچ کس سیٹ9
9
Bar, frame and drive
Bar, frame and drive
Fix the axles in the axle blocks on a pine frame so they do not turn. Fix the toothed bar to the axles inside the drum with two pine arms, a little to one side of the centre, teeth toward the cleats' pins. Wrap a belt round the drum and turn it by a crank and pulley, or turn the drum by hand. Optionally fit a sealed can between the axles as a tempering cylinder fed through one axle.
اس مرحلے کے لیے مواد:
چیڑ کا تختہ1 ٹکڑالکڑی کا پیچ #8 × ۱ انچ1 ٹکڑا
لکڑی کا گوند1 ٹکڑاپی وی سی پائپ1 ٹکڑادرکار اوزار:
ہاتھ کی آریبے تار مشق
مشقوں کا سیٹپیچ کس سیٹ10
10
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the drum cut away to show the cleats with pins, the stationary toothed bar a little off centre, the tempering cylinder between the axles, the frame and the drive ring.
11
11
Turn the drum and make butter
Turn the drum and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres, a third to two thirds full as he said, and close the door. Turn the drum steadily below the notebook's speed; time until the butter comes. Take the butter out through the door. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
اس مرحلے کے لیے مواد:
گاڑھی بالائی2000 ملی لیٹر
موٹا سمندری نمک1 ٹکڑا
پانی1 ٹکڑادرکار اوزار:
اندر رہنے والی سلاخ والا ترمامیٹر
اسٹاپ واچ
ڈیجیٹل باورچی خانہ ترازو
زنگ نہ لگنے والے فولاد کا بڑا ملانے کا پیالہ12
12
Pins that strike, a door that leaks
Pins that strike, a door that leaks
Revolving-drum toothed-bar troubleshooting.
Flow
Loading...
13
13
History and honest limits
History and honest limits
**George B. Clarke** of Leonardsville, Brookfield, Madison County, New York, received US 8,373, dated 23 September 1851. The drum was driven by a belt round a pulley on one end, or round its hoops, so one churn could drive others; the cross bar had a joint at its centre so it could be doubled and put in or taken out through the lid. He claimed the revolving vessel with cleats working with a stationary cross bar, and the tempering cylinder and tubes in combination with them.
**Honest limits.** We leave out his pump; a container, pipe and printed parts stand in for his. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
مواد
10- 1 ٹکڑاپلیس ہولڈر
- پلیس ہولڈر
- 1 ٹکڑاپلیس ہولڈر
- 1 ٹکڑاپلیس ہولڈر
- 2 ٹکڑےپلیس ہولڈر
- 1 ٹکڑاپلیس ہولڈر
- 1 ٹکڑاپلیس ہولڈر
- 2000 ملی لیٹرپلیس ہولڈر
- 1 ٹکڑاپلیس ہولڈر
- 1 ٹکڑاپلیس ہولڈر
درکار اوزار
11- پلیس ہولڈر
- پلیس ہولڈر
- 1 vendor sell this, none ship to you yetپلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
- پلیس ہولڈر
ڈیزائن فائلیں
4یہ بلوپرنٹ بناتا ہے
متعلقہ بلیو پرنٹ
یہ بلیو پرنٹ علم بانٹتے ہیں — تکنیک، مواد یا اصول
Centrifugal Buttermilk-Extractor Churn: A Spinning Drum That Throws the Buttermilk Out
Martin کی طرف سے
خوراک اور مشروبات
33
0
0
0
0
0
Water-Jacketed Churn: Hot or Cold Water Under a Metal Plate Tempers the Cream
Karen کی طرف سے
خوراک اور مشروبات
34
0
0
0
0
0
Spiral-Float Air-Arm Churn: A Perforated Screw Over a Breathing Wedge
YourGrandma کی طرف سے
خوراک اور مشروبات
36
0
0
0
0
0
CC0 پبلک ڈومین
یہ بلیو پرنٹ CC0 کے تحت جاری کیا گیا ہے۔ آپ اجازت لیے بغیر اس کام کو نقل، ترمیم، تقسیم اور کسی بھی مقصد کے لیے استعمال کرنے کے لیے آزاد ہیں۔
میکر کی حمایت کریں ان کے بلیو پرنٹ کے ذریعے پروڈکٹس خرید کر جہاں وہ میکر کمیشن وینڈرز کی طرف سے مقرر، کماتے ہیں، یا اس بلیو پرنٹ کی نئی تکرار بنائیں اور آمدنی شیئر کرنے کے لیے اسے اپنے بلیو پرنٹ میں کنکشن کے طور پر شامل کریں۔