Współpraca
SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Hand Bellows From a Whole Ram Skin With a Wooden Head and Iron Tube (Theophilus, 12th Century)
Forge

Autor

Forge

14. listopad 2026NO
6
0
0
0
0

Hand Bellows From a Whole Ram Skin With a Wooden Head and Iron Tube (Theophilus, 12th Century)

The goldsmith's bellows from Theophilus's De Diversis Artibus (12th century): a ram skin stripped off whole through an opening behind, stuffed with straw and dried, cured a day and two nights in lye and salt, stretched, oiled, and fitted with a wooden head and iron tube at the neck, four sticks across the back, and a thumb loop and finger loop to work it.
Średniozaawansowany
About 4 days

Instrukcje

1

Schedule

Wczytywanie notatnika Jupyter…
2

Read De Diversis Artibus, Book III

"Then make bellows from the skins of rams, thus: When the rams are killed, the skins must not be cut under the belly, but they are opened behind."
3

Strip and cure the skin

Open the ram's skin behind, not under the belly, and turn it so it strips off whole. Fill it with straw and dry it moderately. Lay it in lye and salt for a day and two nights.

Materiały do tego kroku:

Owcza skóraOwcza skóra1 sztuka
SłomaSłoma1 sztuka
Ług z popiołu drzewnegoŁug z popiołu drzewnego1 sztuka
SólSól1 sztuka

Potrzebne narzędzia:

Nóż do skóryNóż do skóry
Wiadro 20-litroweWiadro 20-litrowe
4

Stretch and oil

On the third day stretch it lengthwise, but more in breadth. Anoint it (tallow is our choice) and stretch it again.

Materiały do tego kroku:

ŁójŁój1 sztuka
5

Fit the head and tube

Make a wooden head that passes through the skin's neck and bind it there; bore it for an iron tube (rolled from sheet iron, our method).

Materiały do tego kroku:

Deska z drewna liściastegoDeska z drewna liściastego1 sztuka
Blacha żelazna (kuta)Blacha żelazna (kuta)1 sztuka
Sznurek jutowySznurek jutowy1 sztuka

Potrzebne narzędzia:

Piła ręcznaPiła ręczna
Świder korbowy z wiertłemŚwider korbowy z wiertłem
Nóż do skóryNóż do skóry
MłotekMłotek
6

Fit the back and loops

Across the back opening place four pieces of wood: two joined together and fixed in the middle, two sewn onto the skin, so the joins come above and below. Sew on two loops of the same skin, a smaller one above for the thumb and a larger one below for the other four fingers.

Materiały do tego kroku:

Deska z drewna liściastegoDeska z drewna liściastego1 sztuka
Nić lnianaNić lniana1 sztuka

Potrzebne narzędzia:

SzydłoSzydło
Dwie igły rymarskieDwie igły rymarskie
Nóż do skóryNóż do skóry
Piła ręcznaPiła ręczna
7

Use

Put the iron tube in the hole of the furnace, lay fire and charcoal at the back and front, and blow, first to dry the new furnace.
8

Troubleshooting

Bellows troubleshooting.

Flow

Loading...
9

History and honest limits

From Theophilus Presbyter, **De Diversis Artibus** (12th century), Book III, chapter IV, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 211-213). He gives no sizes and does not say what the skin is anointed with; tallow, the rolled sheet-iron tube, the tools and the diagram are ours.

Materiały

9

Wymagane narzędzia

7

Według tego planu powstaje

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...