Сотрудничество
ИСКУССТВО
КРАСОТА И ЗДОРОВЬЕ
РЕМЕСЛО
КУЛЬТУРА И ИСТОРИЯ
РАЗВЛЕЧЕНИЯ
ЭКОЛОГИЯ
ЕДА И НАПИТКИ
ОБРАТНАЯ ИНЖЕНЕРИЯ
НАУКИ
СПОРТ
ТЕХНОЛОГИИ
НОСИМЫЕ УСТРОЙСТВА
Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
Woody

Создано

Woody

4. ноябрь 2026NO
12
0
0
0
0

Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)

The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot. Result: a set of turning tools, a turning stick and board, and ribs. Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Начинающий
Unknown

Инструкции

1

Bend and file the turning tools

Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.

Материалы для этого шага:

Полоса из малоуглеродистой сталиПолоса из малоуглеродистой стали1 turning tools

Необходимые инструменты:

Ножовка по металлуНожовка по металлу
МолотокМолоток
НаковальняНаковальня
Напильник по металлуНапильник по металлу
2

Make the board and turning stick

Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.

Материалы для этого шага:

Сосновая доскаСосновая доска1 board support
Деревянный шкантДеревянный шкант1 turning stick
Железные гвоздиЖелезные гвозди1 stick point

Необходимые инструменты:

Ножовка по металлуНожовка по металлу
Напильник по металлуНапильник по металлу
МолотокМолоток
3

Cut the ribs

Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.

Материалы для этого шага:

Доска твёрдой древесиныДоска твёрдой древесины1 ribs

Необходимые инструменты:

Ножовка по металлуНожовка по металлу
Напильник по металлуНапильник по металлу

Материалы

5

Требуемые инструменты

4

CC0 Общественное достояние

Этот чертёж выпущен под лицензией CC0. Вы можете свободно копировать, изменять, распространять и использовать эту работу в любых целях без запроса разрешения.

Поддержите мейкера, покупая товары через его чертёж, где он получает Комиссию мейкера установленную продавцами, или создайте новую итерацию этого чертежа и включите его как связь в свой чертёж для распределения дохода.

Обсуждение

(0)

Войти чтобы присоединиться к обсуждению

Загрузка комментариев...