Ubufatanye
UBUHANZI
UBWIZA N'UBUZIMA
UBUKORIKORI
UMUCO N'AMATEKA
IMYIDAGADURO
IBIDUKIKIJE
IBIRIBWA N'IBINYOBWA
UBWUBATSI BUSUBIRA INYUMA
UBUMENYI
SIPORO
IKORANABUHANGA
IBYAMBARWA
Gasoline by Pressure Cracking: Heavy Residue Distilled at 650-850 °F under 4-5 Atmospheres (Burton, US 1,049,667)
Charlie

Yaremwe na

Charlie

29. Ukwakira 2026DE
15
0
0
0
0

Gasoline by Pressure Cracking: Heavy Residue Distilled at 650-850 °F under 4-5 Atmospheres (Burton, US 1,049,667)

Straight distillation leaves most of a barrel of crude as heavy oil. Burton's 1913 patent turns that residue into gasoline: distil it hot while its own vapour is held at 4 to 5 atmospheres, all the way through the condenser. The heat and pressure break the heavy oil into light oil. Cracked gasoline is the first rung toward high-octane fuel. Feed: the fuel-oil and gas-oil residue left after the light cuts, boiling at about 600 to 700 °F (claim: above 500 °F). Source: W. M. Burton, US 1,049,667 (1913), assigned to Standard Oil (Indiana). Not given: charge size, run time, yield. Burton claims the gasoline stays in the paraffin series; that is his claim. A fired still under pressure needs a working safety valve. Picture: the patent drawing.
Impuguke
2 days

Amabwiriza

1

Fill the pressure still with residue

The still is a closed, boiler-like holder over a fire chamber, with a safety valve, a pressure gauge, and a thermometer in an oil-filled tube slanting into it. Fill it with the heavy residue left after the gasoline and illuminating oils have been distilled off.

Ibikoresho by'iyi ntambwe:

Ibisigazwa bya peteroliIbisigazwa bya peteroli1 still charge

Ibikoresho bikenewe:

Inkono iyungurura ifite igitutuInkono iyungurura ifite igitutu
Igipima UmuvudukoIgipima Umuvuduko
Igipima UbushyuheIgipima Ubushyuhe
2

Close the outlet and fire it

A pipe rises from the top of the still to a water-cooled condenser coil, then runs to a receiver tank. Keep the shut-off valve after the coil closed and fire the still. The vapours build up 4 to 5 atmospheres on the liquid, and its boiling point rises from 500-600 °F to 750-800 °F.

Ibikoresho bikenewe:

Inkono iyungurura ifite igitutuInkono iyungurura ifite igitutu
Umuzingo w'ikondanseriUmuzingo w'ikondanseri
AmaziAmazi
Igipima UmuvudukoIgipima Umuvuduko
3

Distil at 650 to 850 °F under pressure

Distil at about 650 to 850 °F. Keep the pressure on the vapours the whole way, in the still and while they condense in the coil. The heat and pressure turn the heavy oil into low-boiling oil.

Ibikoresho bikenewe:

Inkono iyungurura ifite igitutuInkono iyungurura ifite igitutu
Igipima UbushyuheIgipima Ubushyuhe
Igipima UmuvudukoIgipima Umuvuduko
4

Draw off the gasoline from time to time

Open the shut-off valve now and then to run the condensed gasoline into the receiver. Do it often enough that the coil never fills with liquid.

Ibikoresho bikenewe:

Umuzingo w'ikondanseriUmuzingo w'ikondanseri
Ikigega cyo kubika peteroliIkigega cyo kubika peteroli
5

Let off the gas

Gas that will not condense collects in the coil and blocks it. Release it from time to time through the relief valve on the pipe rising from the lower end of the coil. Burton does not say what becomes of it. Ours: collect it under pressure if it is to be used.

Ibikoresho bikenewe:

Umuzingo w'ikondanseriUmuzingo w'ikondanseri
Ibariro rya gazi ifite igitutuIbariro rya gazi ifite igitutu

Ibikoresho

1

Ibikoresho bikenewe

7

CC0 Umurenge rusange

Iyi blueprint yasohowe munsi ya CC0. Ushobora gukoporora, guhindura, gukwirakwiza no gukoresha nta kwemererwa.

Shyigikira Umuremyi ugura ibicuruzwa binyuze muri Blueprint ye Komisiyo y'Umuremyi byashyizweho n'Abacuruzi, cyangwa kora verisiyo nshya y'iyi Blueprint ukayinjiza nk'isano muri Blueprint yawe kugira ngo musangire inyungu.

Ibiganiro

(0)

Injira kugira ngo ujye mu biganiro

Gutegura ibitekerezo...