ศิลปะ
ความงามและสุขภาพ
งานฝีมือ
วัฒนธรรมและประวัติศาสตร์
ความบันเทิง
สิ่งแวดล้อม
อาหารและเครื่องดื่ม
วิศวกรรมย้อนรอย
วิทยาศาสตร์
กีฬา
เทคโนโลยี
อุปกรณ์สวมใส่

Camp Bed on Forked Stakes: Two Poles in the Crotches and Canvas Lapped Over Them (Boy Mechanic, 1915)
"A quickly made bed for a camp", from The Boy Mechanic, Book 2 (1915): four forked stakes driven into the ground with their crotches level about 1 ft up, two poles laid in them lengthwise, and canvas double-lapped over the poles.
It keeps the sleeper off the damp ground with nothing but stakes, poles and a piece of canvas.
เริ่มต้น
About 1 hour
คำแนะนำ
1
1
Read The Boy Mechanic
Read The Boy Mechanic
"The corner posts consist of four forked stakes driven in the earth so that the crotches are on a level and about 1 ft. from the ground." (Thomas Simpson, Pawtucket, R. I.)
2
2
Drive the forked stakes
Drive the forked stakes
Cut four forked stakes and drive them into the earth at the corners of the bed, so that all four crotches are level and about 1 ft (30 cm) from the ground. Space them to suit the sleeper (our choice).
วัสดุสำหรับขั้นตอนนี้:
หลักไม้4 ชิ้นเครื่องมือที่ต้องใช้:
ขวานป่าไม้
ค้อนไม้
ตลับเมตร3
3
Lay the poles
Lay the poles
Lay two poles in the crotches, lengthwise of the bed.
วัสดุสำหรับขั้นตอนนี้:
เสาไม้2 ชิ้นเครื่องมือที่ต้องใช้:
ขวานป่าไม้4
4
Lap the canvas over
Lap the canvas over
Lay the canvas over the poles, double-lapped round them so the sleeper's weight holds it. If you like, stitch the canvas along the inside of the poles.
วัสดุสำหรับขั้นตอนนี้:
ผ้าใบ1 ชิ้น
ด้ายเย็บผ้า1 ชิ้นเครื่องมือที่ต้องใช้:
เข็มเย็บผ้า5
5
Troubleshooting
Troubleshooting
Camp bed troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2**, edited by H. H. Windsor, Popular Mechanics, Chicago, 1915 (Project Gutenberg 44585), "Bed for a Camp", sent in by Thomas Simpson of Pawtucket, R. I. He gives only the 1 ft height; the bed size, the tools and the metric figure are ours.
วัสดุ
4- 4 ชิ้นตัวยึดตำแหน่ง
- 2 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
- 1 ชิ้นตัวยึดตำแหน่ง
พิมพ์เขียวนี้สร้าง
บลูพริ้นท์ที่เกี่ยวข้อง
บลูพริ้นท์เหล่านี้แบ่งปันความรู้ — เทคนิค วัสดุ หรือหลักการ
CC0 สาธารณสมบัติ
พิมพ์เขียวนี้เผยแพร่ภายใต้ CC0 คุณสามารถคัดลอก แก้ไข แจกจ่าย และใช้งานผลงานนี้เพื่อวัตถุประสงค์ใดก็ได้ โดยไม่ต้องขออนุญาต
สนับสนุนเมกเกอร์โดยซื้อสินค้าผ่านพิมพ์เขียวของพวกเขา ซึ่งพวกเขาจะได้รับ ค่าคอมมิชชันเมกเกอร์ ที่ผู้ขายกำหนด หรือสร้างเวอร์ชันใหม่ของพิมพ์เขียวนี้และรวมเป็นการเชื่อมต่อในพิมพ์เขียวของคุณเพื่อแบ่งรายได้


