İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Diagonal-Blade Shouldered-Breaker Churn: Pitched Blades on Uneven Arms Turn Under the Shoulders of Two Breakers
Buttercup

Oluşturan

Buttercup

11. Kasım 2026IE
5
0
0
0
0

Diagonal-Blade Shouldered-Breaker Churn: Pitched Blades on Uneven Arms Turn Under the Shoulders of Two Breakers

Lester Day of Buffalo, New York, received US 26,970, dated 31 January 1860, for a churn. An upright shaft carries short upper arms and long lower arms, each with a rectangular blade set diagonally and adjustable along it, the two of a pair at different distances so neither follows the other's track. Two breakers, joined at the top and lifting out together, stand opposite each other with stepped shoulders under which the blades turn, and holes the cream is thrown through. The patent gives no sizes; every size here is ours.
Orta
About 2 days, plus printing

Talimatlar

1

Blades that never follow each other's track

Jupyter defteri yükleniyor…
2

Short blades within, a long one under, two months before

Jebb's thick staves are part of the tub. Day's breakers stand free, step back in two shoulders, and lift out.
3

Read US 26,970

"Motion being given to the dash blades by means of the crank and gearing, in the direction of the arrows, they will by their diagonal position on the arms throw the cream or milk outward against the side of the barrel and against the breakers, part passing through the space between the breakers and the side of the barrel, and part being thrown through the holes (h) in the breakers and part being thrown back by the breakers meeting these currents causing a concussion between them"
4

Print the wheel J

Crown wheel, 36 teeth on its face, module 2, with a hub bored 12.4 mm and a cross hole for a pin. PETG, 0.2 mm layers, 40 % infill, 4 walls.
Tasarım DosyasıSTLCC0 - Free
5

Print the pinion I

Spur pinion, 12 teeth, module 2, with a 12.4 mm square socket for the shaft's top. PETG, 0.2 mm layers, 40 % infill, 4 walls.
Tasarım DosyasıSTLCC0 - Free
6

Print the foot step b

A cup 60 mm across and 25 mm tall with a 21 mm socket for the shaft's foot. PETG, 0.2 mm layers, 40 % infill, 4 walls.
Tasarım DosyasıSTLCC0 - Free
7

Tub A, breakers E and cross piece F

Use a wooden tub 360 mm across inside and 450 mm deep; glue the foot step in the middle of its floor and two hardwood sockets g opposite each other against the wall. Cut two breakers from 15 mm hardwood, 420 mm tall, their outer edges 10 mm off the wall: from the top down to 350 mm up their inner edges reach 40 mm from the middle, then step out at H to 118 mm, and at H' (165 mm up) to 150 mm. Bore two 30 mm holes h through each at 220 and 290 mm up. Screw a cross piece 336 x 40 x 20 mm across their tops, bored 32 mm in the middle, and stand them in the sockets leaning slightly. Fill the tub with water overnight so it swells tight, then empty it.

Bu adım için malzemeler:

Ahşap tekneAhşap tekne1 adet
Sert Ağaç TahtasıSert Ağaç Tahtası2 adet
Ahşap TutkalıAhşap Tutkalı1 adet
Ahşap vidalarAhşap vidalar12 adet
PETG filamentPETG filament1 adet

Gerekli aletler:

FDM 3B yazıcıFDM 3B yazıcı
Dekupaj TestereDekupaj Testere
Daire testere tezgâhıDaire testere tezgâhı
Yassı matkap ucu takımıYassı matkap ucu takımı
Kablosuz MatkapKablosuz Matkap
Matkap Ucu TakımıMatkap Ucu Takımı
Çubuklu işkenceÇubuklu işkence
Şerit MetreŞerit Metre
SuSu
8

Shaft B, arms C and blades D

Turn a hardwood shaft 30 mm across and 500 mm long, its foot turned to 19 mm and its top 40 mm cut to a 12 mm square. Bore it across for two 16 mm hardwood arms at 300 mm up, 204 mm long, and two at 110 mm up at right angles, 272 mm long. Cut eight blades 90 x 70 x 10 mm, bore each through its middle at 45 degrees to its face for the arm, and slide them on: the upper pair at 50 and 62 mm from the shaft, the lower at 84 and 96 mm, the nearer and farther blade on opposite sides. Pin each where it sits.

Bu adım için malzemeler:

Sert Ağaç TahtasıSert Ağaç Tahtası1 adet
Sert ağaç kavelalarSert ağaç kavelalar2 adet
Ahşap TutkalıAhşap Tutkalı1 adet

Gerekli aletler:

Ahşap torna tezgâhıAhşap torna tezgâhı
Daire testere tezgâhıDaire testere tezgâhı
Kablosuz MatkapKablosuz Matkap
Matkap Ucu TakımıMatkap Ucu Takımı
Zımpara KağıdıZımpara Kağıdı
Şerit MetreŞerit Metre
9

Cover L, gear frame K and crank M

Cut a cover to sit on the rim, bored 32 mm in its middle, held by two hooks and eyes. Screw two chairs on it in a line from the middle, carrying a 12 mm stainless shaft with the crown wheel and a crank, and drop the pinion over the shaft's square top so they mesh. Lift the cover off to free the shaft; lift the breakers out by the cross piece to clean them.

Bu adım için malzemeler:

Sert Ağaç TahtasıSert Ağaç Tahtası1 adet
Paslanmaz çelik çubukPaslanmaz çelik çubuk1 adet
KopçaKopça2 adet
Ahşap vidalarAhşap vidalar8 adet
Sert ağaç kavelalarSert ağaç kavelalar1 adet
Ahşap TutkalıAhşap Tutkalı1 adet

Gerekli aletler:

Dekupaj TestereDekupaj Testere
PusulaPusula
Kablosuz MatkapKablosuz Matkap
Matkap Ucu TakımıMatkap Ucu Takımı
Demir TesteresiDemir Testeresi
Eğeler (El Eğesi)Eğeler (El Eğesi)
Tornavida takımıTornavida takımı
10

The build in 3D

FreeCAD model of this build, the tub and cover cut through the middle: the two shouldered breakers with their holes and cross piece, the shaft with its short upper and long lower arms and diagonal blades, the foot step, and the crown wheel, pinion and crank on the cover. The dash was turned through 24 positions.
Tasarım DosyasıBLENDCC0 - Free
11

Churn

Pour about 15 litres of heavy cream at about 15 °C into the tub, checked with the thermometer, put the cover on and hook it. Turn the crank steadily in the blades' direction, timing it. When the butter comes, lift the cover, dash and breakers out, take out the butter, drain the buttermilk, wash the butter in cold water until it runs clear, salt and weigh it.

Bu adım için malzemeler:

Yağlı kremaYağlı krema15 l
İri Deniz Tuzuİri Deniz Tuzu1 adet
SuSu1 adet

Gerekli aletler:

Takılı kalan problu termometreTakılı kalan problu termometre
KronometreKronometre
Dijital Mutfak TerazisiDijital Mutfak Terazisi
Büyük paslanmaz çelik karıştırma kâsesiBüyük paslanmaz çelik karıştırma kâsesi
12

Troubleshooting

Shouldered-breaker churn troubleshooting.

Flow

Loading...
13

History and honest limits

**Lester Day** of Buffalo, Erie County, New York, US 26,970, 31 January 1860, "Churn". He claimed the breakers E with shoulders H, H', fixed to the cross piece F and removable with it, and the adjustable diagonal dash blades D working with them. His blades may also be turned on their arms to throw the cream upward, or inward and downward when reversed. His bevel wheel and pinion are here a printed crown wheel and pinion. The patent gives no sizes; every size here is ours.

Malzemeler

11

Gerekli Aletler

19

Tasarım dosyaları

4
  • day-diagonal-blade-shouldered-breaker-churn-wheel-j.stlSTLCC0
  • day-diagonal-blade-shouldered-breaker-churn-pinion-i.stlSTLCC0
  • day-diagonal-blade-shouldered-breaker-churn-step-b.stlSTLCC0
  • day-diagonal-blade-shouldered-breaker-churn.blendBLENDCC0

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...