İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
Spiral-Edge Countersinks: One Curved Slot Up the Cone Makes an Edge That Slices Instead of Scraping (Laursen, 1926)
Forge

Oluşturan

Forge

13. Kasım 2026NO
7
0
0
0
0

Spiral-Edge Countersinks: One Curved Slot Up the Cone Makes an Edge That Slices Instead of Scraping (Laursen, 1926)

Laust K. Laursen of College Station, Texas, received US 1,586,559, dated 1 June 1926. Ordinary countersinks have straight edges in radial planes, which press on the wood all at once and scrape it, like pushing a knife straight down on a loaf. Laursen curved the edge into a spiral running up and out from near the point, ahead of the radial line as the tool turns. It reaches the wood a little at a time and slices, leaving a smooth countersink without chatter. His simplest form is one curved slot in the cone, its leading edge sharpened and the cone behind it relieved. We make a set of three in tool steel. The patent gives no sizes; every size here is ours.
Orta
About 1 day

Talimatlar

1

Why a spiral edge shears

Jupyter defteri yükleniyor…
2

Read US 1,586,559

"In this particular form the spiral extends outwardly in the direction of action, that is to say, the usual direction of rotation of a countersink is clockwise, viewed from the top, or counterclockwise, as viewed from the bottom." "It has been found that a hole formed with a countersink as shown in Figs. 1 and 2 will be very smooth and uniform on the inside."
3

Turn the blanks

From octagonal tool steel turn three blanks: a 90 degree cone 3 to a point, 12, 16 and 20 mm across at its base, then the body 1 and an 8 mm shank 2 50 mm long with three filed flats. Heat each to a cherry red and let it cool slowly in the air to soften it.

Bu adım için malzemeler:

Sekizgen takım çeliği çubukSekizgen takım çeliği çubuk2 adet

Gerekli aletler:

Metal Torna TezgâhıMetal Torna Tezgâhı
3 ayaklı torna aynası3 ayaklı torna aynası
Torna kesici kalemiTorna kesici kalemi
Kesme kalemiKesme kalemi
İletkiİletki
Dijital Kumpas 6 İnçDijital Kumpas 6 İnç
Eğe TakımıEğe Takımı
Demirci OcağıDemirci Ocağı
Demirci MaşasıDemirci Maşası
Koruyucu gözlükKoruyucu gözlük
4

File the spiral slot 4

Blue the cone and scribe a spiral on it from 1 mm from the point to the rim, turning a quarter of the way round, leaning ahead in the direction the tool turns (clockwise seen from the shank). File a slot along it with a round needle file, 2 to 3 mm wide and 1.5 mm deep at the rim, shallower towards the point. Sharpen the slot's leading edge 5 and file the cone behind it slightly lower, so only the edge touches the work.

Gerekli aletler:

İğne Eğe Takımıİğne Eğe Takımı
Makine MengenesiMakine Mengenesi
Eğe TakımıEğe Takımı
5

Harden and temper

Heat each head to a cherry red, until a magnet no longer sticks, and quench it point first in water, moving it about. Rub it bright with a stone, heat the shank gently 20 mm behind the head, and quench again as soon as a light straw colour reaches the cutting edge.

Gerekli aletler:

Demirci OcağıDemirci Ocağı
Demirci MaşasıDemirci Maşası
Küçük MıknatısKüçük Mıknatıs
Su verme kovasıSu verme kovası
SuSu
Bileği TaşıBileği Taşı
Kaynak eldivenleriKaynak eldivenleri
Koruyucu gözlükKoruyucu gözlük
6

Hone and test

Hone the edge lightly with the stone. Drill screw holes in hardwood and countersink them: the edge should cut a smooth bell with no chatter and throw curled shavings out of the slot.

Gerekli aletler:

Bileği TaşıBileği Taşı
Kablosuz MatkapKablosuz Matkap
Matkap Ucu TakımıMatkap Ucu Takımı
Sert Ağaç TahtasıSert Ağaç Tahtası
Koruyucu gözlükKoruyucu gözlük
7

Troubleshooting

Spiral countersink troubleshooting.

Flow

Loading...
8

History and honest limits

**Laust K. Laursen** of College Station, Texas, US 1,586,559, dated 1 June 1926, filed 1 August 1925. He set out to give a countersink "a cutting blade or edge so arranged that it will tend to cut, rather than scrape, the work", each edge curving spirally of the tool. He shows three forms: one slot in a hollow head, two split halves with twin edges, and a many-bladed one he found better for metal; we make the first, in one piece. He gives no sizes or angle; our 90 degree cones, quarter-turn spiral and the house hardening are ours.

Malzemeler

1

Gerekli Aletler

20

CC0 Kamu Malı

Bu plan CC0 lisansıyla yayınlanmıştır. İzin almadan kopyalayabilir, değiştirebilir, dağıtabilir ve herhangi bir amaçla kullanabilirsiniz.

Planı üzerinden ürün satın alarak Maker'ı destekleyin, böylece Maker Komisyonu Satıcılar tarafından belirlenen komisyonu kazanırlar veya bu Planın yeni bir versiyonunu oluşturun ve gelir paylaşımı için kendi Planınıza bağlantı olarak ekleyin.

Tartışma

(0)

Giriş yapın tartışmaya katılmak için

Yorumlar yükleniyor...