Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Martingale: Neck Strap and Slit Breast Strap With Rings (Hasluck, Saddlery, 1904)
A martingale runs from the girth up between the horse's forelegs and stops it throwing its head too high. This is the martingale from Paul N. Hasluck's Saddlery (1904), as in his Fig. 11: a neck strap about 4 ft 6 in long, and a breast strap slit at the top into two branches, each ending in a ring for the reins. Every size is his; he does not give the size of the rings.
Середній
About 1 day
Інструкції
1
1
His sizes in centimetres
His sizes in centimetres
Завантаження блокнота Jupyter…
2
2
Read Saddlery, ch. V
Read Saddlery, ch. V
"Martingales (Fig. 11) are made with straps round the neck, either flat or round, and with or without a buckle; the total length is about 4 ft. 6 in., and the flat strap is 3/4 in. wide."
3
3
Make the neck strap
Make the neck strap
Cut the neck strap about 4 ft 6 in long and 3/4 in wide. With a buckle: place a piece of leather about 1 ft 3 in from the buckle for the breast strap and stitch it at both ends, so it makes an opening. Round the rest of the neck strap, leaving about 1 ft flat for a 3/4 in buckle. Without a buckle, make the opening by simply overlapping the ends, leaving enough space between the two splices for the breast strap.
Матеріали для цього кроку:
Лимарна шкіра1 штука
Шнур1 штука
Залізна пряжка з язичком1 штука
Лляна нитка1 штука
Бджолиний віск1 штукаНеобхідні інструменти ({count})
Ніж для шкіри
Жолобкова дошка
Крайкоріз
Гладило для краю шкіри
Бігувальник
Пропановий пальник
Шило
Дві лимарські голки
Лимарські лещата
Рулетка4
4
Cut and slit the breast strap
Cut and slit the breast strap
Cut the breast strap 1-1/4 in wide and 4 ft long and slit it for 1 ft 1 in. It may be flat or round; a round one must be cut wider to begin with, say 1-5/8 in, and then slit in half.
Матеріали для цього кроку:
Лимарна шкіра1 штукаНеобхідні інструменти ({count})
Ніж для шкіри
Рулетка5
5
Make the girth loop
Make the girth loop
For a flat strap, narrow it at the unslit end for 1 ft 6 in from the end. Fix a 1 in buckle there the reverse way and buckle the strap back on itself to form a loop for the girth. Fit this buckle before the rings.
Матеріали для цього кроку:
Залізна пряжка з язичком1 штука
Лляна нитка1 штука
Бджолиний віск1 штукаНеобхідні інструменти ({count})
Ніж для шкіри
Крайкоріз
Гладило для краю шкіри
Бігувальник
Пропановий пальник
Шило
Дві лимарські голки
Пробійник для шкіри6
6
Put on the rings and finish
Put on the rings and finish
Put a ring on the end of each slit branch, as in Fig. 11; he does not give the ring size. Then run the buckle end of the breast strap through the opening in the neck strap, and the martingale is complete.
Матеріали для цього кроку:
Збруйне кільце2 штук
Лляна нитка1 штука
Бджолиний віск1 штукаНеобхідні інструменти ({count})
Ніж для шкіри
Шило
Дві лимарські голки
Лимарські лещата7
7
Troubleshooting
Troubleshooting
Martingale troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, martingales, pp. 45-47, Fig. 11 on p. 43; every fraction was read on the scan. He names the rings but gives no size for them, and does not say how they are fixed to the branches: follow Fig. 11. The combined martingale and breastplate on p. 45 is not made here. The thread, tools and metric figures are ours.
Матеріали
6- 2 штукЗаповнювач
- 1 штукаЗаповнювач
- 1 штукаЗаповнювач
- 3 штукЗаповнювач
- 3 штукЗаповнювач
- 2 штукЗаповнювач
Необхідні інструменти
11- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- 1 vendor sell this, none ship to you yetЗаповнювач
- Заповнювач
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.


