Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО

Newmarket Head Collar: Stable Halter With Squared Stays, Noseband, Cheeks and Throat Lash (Hasluck, Saddlery, 1904)
A head collar, also called a headstall or stable collar, ties a horse up in the stable. This is the Newmarket pattern from Paul N. Hasluck's Saddlery (1904): two short stays carrying three stop squares, a noseband, two cheeks, an upward stay, a forehead band, a top strap and a throat lash. Every size is his.
It has no bit; the rein is fastened to the centre square.
Середній
About 1 day
Інструкції
1
1
Cutting list
Cutting list
Завантаження блокнота Jupyter…
2
2
Read Saddlery, ch. VIII
Read Saddlery, ch. VIII
"Head collars, also called headstalls and stable collars, are made in various ways, and one of the most useful styles will be described in this chapter."
3
3
Make the short stays
Make the short stays
Cut two short straps 1 ft by 1-1/4 in and turn them in to 5 in long, leaving 1 in or a little more for overlap. Shave the ends and prick them eight to the inch. Put one square in the centre between them and one in each end, with the stops on the same side. Lay a strip of leather along the centre of each to raise the stay, then stitch with beeswaxed three-cord hemp thread, with a strong cross-stitch at the end of each line.
Матеріали для цього кроку:
Лимарна шкіра1 штука
Квадратне кільце недоуздка3 штук
Конопляний шпагат1 штука
Бджолиний віск1 штукаНеобхідні інструменти ({count})
Ніж для шкіри
Пробійник для шкіри (пробійна вилка)
Шило
Дві лимарські голки
Лимарські лещата
Рулетка4
4
Make the noseband
Make the noseband
Cut the noseband 1 ft 3 in long when turned down. Prepare it and put one end, forming a chape, in each of the end squares of the short stays. Stitch two rows along the edges of the turn-down and trim the ends neatly.
Матеріали для цього кроку:
Лимарна шкіра1 штука
Конопляний шпагат1 штука
Бджолиний віск1 штукаНеобхідні інструменти ({count})
Ніж для шкіри
Пробійник для шкіри (пробійна вилка)
Шило
Дві лимарські голки5
5
Make the cheeks
Make the cheeks
Cut a pair of cheeks 1-1/4 in by 8 in when bent in both ends. Prepare one end of each for a buckle and shave the points of the other turn-down. Put a runner on each cheek and a loop and the 1-1/4 in roller buckle on one end, then stitch the opposite ends to the two outer squares.
Матеріали для цього кроку:
Лимарна шкіра1 штука
Пряжка з роликом1 штука
Конопляний шпагат1 штука
Бджолиний віск1 штукаНеобхідні інструменти ({count})
Ніж для шкіри
Шило
Дві лимарські голки
Оправка для шльовок6
6
Make the upward stay
Make the upward stay
Cut the short upward stay and stitch it behind in the centre square. Its length when doubled is about 4-1/2 in, with an opening left at the top for the throat lash to run through.
Матеріали для цього кроку:
Лимарна шкіра1 штука
Конопляний шпагат1 штука
Бджолиний віск1 штукаНеобхідні інструменти ({count})
Ніж для шкіри
Шило
Дві лимарські голки7
7
Make the forehead band, top strap and throat lash
Make the forehead band, top strap and throat lash
Make the forehead band like the snaffle bridle front. Cut the top strap 2 ft by 1-1/4 in and, when finished, punch about four holes on both sides. Make the throat lash 3 ft 6 in by 3/4 in, with the 3/4 in roller buckle, a loop and a runner, and about nine holes.
Матеріали для цього кроку:
Лимарна шкіра1 штука
Пряжка з роликом1 штука
Конопляний шпагат1 штука
Бджолиний віск1 штукаНеобхідні інструменти ({count})
Ніж для шкіри
Пробійник для шкіри
Шило
Дві лимарські голки
Оправка для шльовок8
8
Put it together
Put it together
Put the forehead band on the head strap and buckle it on both sides in the cheeks. Run the throat lash from the near side through the opening in the upward stay and under the head strap, then through the opening in the forehead band on each side, and bring the point down to the buckle on the near side. If the collar has only one cheek, on the near side, make the strap on the other side 2 ft 9 in long.
9
9
Troubleshooting
Troubleshooting
Head collar troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter VIII, "Head Collars", the Newmarket head collar, Fig. 23; every fraction was read on the scan. His list names one 1-1/4 in roller buckle and one 3/4 in buckle; the throat lash takes a roller buckle of its own width, and fitting the larger one to the cheek is our reading. Not made here: the Albert and Queen's pattern collars and the head collar reins. The metric figures are ours.
Матеріали
5- 5 штукЗаповнювач
- Заповнювач
- 5 штукЗаповнювач
- 5 штукЗаповнювач
- 1 штукаЗаповнювач
Необхідні інструменти
8- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- Заповнювач
- 1 vendor sell this, none ship to you yetЗаповнювач
- Заповнювач
- Заповнювач
За цим кресленням виготовляють
Пов'язані креслення
Ці креслення діляться знаннями — техніки, матеріали або принципи
CC0 Суспільне надбання
Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.
Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.


