Співпраця
МИСТЕЦТВО
КРАСА ТА ЗДОРОВ'Я
РЕМЕСЛО
КУЛЬТУРА ТА ІСТОРІЯ
РОЗВАГИ
СЕРЕДОВИЩЕ
ЇЖА ТА НАПІЇ
ЗБОРНА ІНЖЕНЕРІЯ
НАУК
СПОРТ
ТЕХНОЛОГІЯ
НОСИМО
Plough Coupling Strap: Cross-Strap With Buckled Billets for a Pair of Horses (Hasluck, Harness Making, 1904)
Tex

Створено

Tex

13. листопад 2026FO
6
0
0
0
0

Plough Coupling Strap: Cross-Strap With Buckled Billets for a Pair of Horses (Hasluck, Harness Making, 1904)

When two horses plough side by side, a coupling strap ties them together so they keep level. This is the coupling from Paul N. Hasluck's Harness Making (1904): a 1 in strap 28 in to 30 in long with a buckled billet at each end, buckled from the mouth of one horse to the other. Every size is his; the picture is our diagram.
Початківець
About 2 hours

Інструкції

1

His sizes in centimetres

Завантаження блокнота Jupyter…
2

Read Harness Making, ch. IX

"Couplings are also a necessary part of plough gear. In some localities only cross-straps are employed from mouth to mouth when ploughing in pairs."
3

Cut the strap

Cut the strap 1 in wide and 28 in to 30 in long. Turn it in about 1 in at each end, make a hole for the buckle, and shave the points.

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
Пробійник для шкіриПробійник для шкіри
РулеткаРулетка
4

Make the billets

Cut two billets the same width, 1 ft long; trim them to a point at one end and shave the other. Edge them and crease them (the book prints "edge back, and crease them", probably for "edge, black").

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука
Фарба для шкіриФарба для шкіри1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
КрайкорізКрайкоріз
БігувальникБігувальник
Пропановий пальникПропановий пальник
5

Put it together

Put the buckle in, then the thin end of the billet 2 in down at the back of the buckle. Put a loop between the chape by the buckle, and stitch one billet and buckle at each end. Punch two holes in each billet.

Матеріали для цього кроку:

Залізна пряжка з язичкомЗалізна пряжка з язичком2 штук
Лимарна шкіраЛимарна шкіра1 штука
Шкіряна ниткаШкіряна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

Оправка для шльовокОправка для шльовок
ШилоШило
Дві лимарські голкиДві лимарські голки
Лимарські лещатаЛимарські лещата
Пробійник для шкіриПробійник для шкіри
6

Crossing couplings for a pair

Sometimes two coupling straps are used for a pair, crossing each other from the hames of each horse to the mouth of the other. Make them the same way but longer: 38 in, each with 12 in billets. Some are made a foot longer and cut in two, one end 15 in long with a buckle and loop and the other made to buckle on, with many holes. Then the coupling can be shortened on a young horse's side, to keep it back until it has learned the ordinary working pace.

Матеріали для цього кроку:

Лимарна шкіраЛимарна шкіра1 штука
Залізна пряжка з язичкомЗалізна пряжка з язичком4 штук
Шкіряна ниткаШкіряна нитка1 штука
Бджолиний віскБджолиний віск1 штука

Необхідні інструменти ({count})

Ніж для шкіриНіж для шкіри
Оправка для шльовокОправка для шльовок
ШилоШило
Дві лимарські голкиДві лимарські голки
Пробійник для шкіриПробійник для шкіри
РулеткаРулетка
7

Troubleshooting

Coupling strap troubleshooting.

Flow

Loading...
8

History and honest limits

From **Harness Making**, edited by Paul N. Hasluck, Cassell, 1904 (Project Gutenberg 70169), chapter IX, "Plough Harness", couplings, pp. 110-111; every figure was checked on the archive.org scan (harnessmaking00hasl). He gives no buckle size; a 1 in buckle suits the 1 in strap. The picture is our diagram from his text. The tools and metric figures are ours.

Матеріали

5

Необхідні інструменти

10

За цим кресленням виготовляють

CC0 Суспільне надбання

Це креслення випущено під ліцензією CC0. Ви можете вільно копіювати, змінювати, поширювати та використовувати цю роботу для будь-яких цілей без запиту дозволу.

Підтримайте мейкера, купуючи продукти через його креслення, де він отримує Комісію мейкера встановлену вендорами, або створіть нову ітерацію цього креслення та включіть його як зв'язок у власне креслення для розподілу доходу.

Обговорення

(0)

Увійти щоб приєднатися до обговорення

Завантаження коментарів...