Collaboration
ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES

Navajo Sash or Belt: Warp Wound on Four Stakes, Endless on Two Beams, Tensioned by the Weaver's Weight, Raised Figures Picked Up (Matthews, 1884)
How Navajo (Diné) women wove sashes, belts, garters and hair-bands, as Washington Matthews recorded: warp wound in a figure-8 round four stakes to make both sheds, slid onto two beams so it stays endless, one beam tied high and the other looped under the weaver's thighs for tension, raised figures picked up with a slender stick, and the last foot of warp cut for fringes.
Intermediate
A few hours
Instructions
1
1
His figures
His figures
Loading Jupyter Notebook...
2
2
Read Matthews
Read Matthews
"While still on the loom the belt is endless."
3
3
Wind the warp
Wind the warp
Drive four sticks into the ground: a and b at the ends, c and d between them (Fig. 56). Wind the warp from below upward so every turn passes over a and b but alternate turns over c and d; that makes the two sheds. Usually three colours of thread are used. Tie a string round the crossing of the sheds to keep them apart. (Ours: space a and b about the finished length of the sash.)
Materials for this step:
Dyed Wool Yarn1 pieceTools needed:
Tent Stake
Wooden Mallet4
4
Mount it
Mount it
Put the upper beam in place of stick b and the lower beam in place of a. Tie the upper beam to a rafter, post or tree; tie a loop of rope to the lower beam and pass it under your thighs, so your weight pulls the warp tight. Put a shed-rod in the upper shed, string healds on the lower shed, and add a round stick with one loop of each thread round it to keep them in order.
Materials for this step:
Wooden Dowel1 piece
Rope1 piece
Cordage1 pieceTools needed:
Knife5
5
Weave
Weave
Weave with a short batten (much shorter than a blanket batten), the reed-fork rarely needed. For raised figures, slip a slender stick under chosen warp threads and pass the weft twice or more beneath them: the back shows a different figure. A skilled weaver made 25-30 cm an hour.
Materials for this step:
Dyed Wool Yarn1 piece
White Oak Board1 pieceTools needed:
Drawknife
Knife6
6
Move the warp and finish
Move the warp and finish
When you can't reach, pull the front layer of warp down toward you: it slides round the beams. When all but about a foot (30 cm) of warp is filled, cut the unwoven warp in the middle: it becomes the fringes.
Tools needed:
Knife7
7
Troubleshooting
Troubleshooting
Sash troubleshooting.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From Washington Matthews, "Navajo Weavers", **3rd Annual Report of the Bureau of Ethnology** (1884), pp. 388-390, Figs. 56-57 and Plate XXXVI (checked on the archive.org scan 101714660.nlm.nih.gov). He saw about a dozen raised-figure patterns, woven from memory. Zuni women set up their belt warps differently, tied to a rafter and to their own belt, with wooden healds. Sash length, width and stake spacing are ours.
Materials
5- 2 piecesPlaceholder
- 1 piecePlaceholder
- 1 piecePlaceholder
- 1 piecePlaceholder
- 1 piecePlaceholder
This blueprint makes
Related Blueprints
These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.
CC0 Public Domain
This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.
Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.


