ART
BEAUTY & WELLNESS
CRAFT
CULTURE & HISTORY
ENTERTAINMENT
ENVIRONMENT
FOOD & DRINKS
REVERSE ENGINEERING
SCIENCES
SPORTS
TECHNOLOGY
WEARABLES
The Siphon Bird Waterer: An Oblique Cut That Lets the Air In
Penny

Created by

Penny

28. September 2026DK
1
0
0
0
0

The Siphon Bird Waterer: An Oblique Cut That Lets the Air In

A drinker that refills itself keeps a caged bird in water for days, but only if it actually refills. Hermann Quittner of Berlin received US 811,870, dated 6 February 1906, for a drinking appliance for bird-cages "made on the principle of a common siphon barometer": a closed tube whose upper part is the reservoir and lower part the basin, joined by a small tube. Its lower end is cut obliquely, so that air bubbles in and the basin refills as the bird drinks, where a square-cut tube could hold the water back. This rung works out how far surface tension can hold the water back, then builds two drinkers, one square-cut and one oblique, and compares them.
Beginner
About 2 hours

Instructions

1

How far a meniscus holds

Loading Jupyter Notebook...
2

Air holds the water up

The embedded blueprint shows the air's pressure holding water up in a closed glass. Quittner's reservoir is held up the same way until the bird lets air in.
3

Read US 811,870

"My invention relates to drinking and feeding appliances designed for bird-cages and made on the principle of a common siphon barometer". In earlier drinkers the small tube was "cut square—that is to say, at right angles to the axis of the tube—which has the disadvantage that by the action of the vacuum formed in the upper part of the vessel on the one hand and the outer air-pressure on the other hand the water is kept in equilibrium, so that the feeding-basin may be emptied without water being allowed to flow from the reservoir." "For the purpose of insuring the outflow from the reservoir to the feeding-basin b in proportion to the removal of water from the latter by the bird the bottom end of the aforesaid small tube is cut obliquely for facilitating the entrance of air-bubbles."
4

Build two drinkers and compare them

Cut two 20 cm lengths of clear acrylic tube. Close the bottom of each with a rubber stopper. With a hacksaw and knife, cut a window 2 cm high in the side of each tube, just above the bottom stopper: this is the basin. Drill a hole through a second stopper for each tube and push a 3 cm length of vinyl tubing through it. Cut the lower end of one tubing square and the other at about 45°. Push each stopper up the tube until it sits just above the window, tubing pointing down into the basin: this is the partition. Stand the tubes upright, fill each reservoir from the top and close it with a third stopper. Draw 1 mL at a time from each basin with the pipette, and note after each draw whether bubbles rise and the basin refills.

Materials for this step:

Acrylic Tube (Clear)Acrylic Tube (Clear)1 piece
Rubber StoppersRubber Stoppers6 pieces
Clear Vinyl TubingClear Vinyl Tubing1 piece
WaterWater200 ml

Tools needed:

Bird WatererBird Waterer
HacksawHacksaw
Hobby Knife with Spare BladesHobby Knife with Spare Blades
Cordless DrillCordless Drill
Drill Bit SetDrill Bit Set
Metal FileMetal File
Glass PipetteGlass Pipette
RulerRuler
5

A drinker that floods, stalls or leaks

Siphon waterer troubleshooting.

Flow

Loading...
6

History and honest limits

**Hermann Quittner** of Berlin filed US 811,870 on 20 December 1904; it was patented 6 February 1906. He hung the tube in the cage by a hook at its top, and noted the same appliance could hold seed, which settles to its own slope in the basin. **Honest limits.** The notebook gives the holding height of a round opening only; an oblique cut exposes its upper edge first, so air gets in sooner, but the notebook does not model that shape. Tube sizes are examples. Your two drinkers are the measurement.

Materials

4

Tools Required

8

Related Blueprints

These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.

CC0 Public Domain

This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.

Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.

Discussion

(0)

Log in to join the discussion

Loading comments...