Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Clay Tool Set: Potter's Turning Tools, Turning Stick and Rib (Binns, The Potter's Craft, 1910)
The potter's set for turning (trimming) leather-hard pots on the wheel, as Binns taught it: soft steel tools the potter bends and files to shape, a turning stick and upright board to steady the hand, and wooden ribs cut to the shape of the inside of a pot.
Result: a set of turning tools, a turning stick and board, and ribs.
Source: C. F. Binns, The Potter's Craft (1910), pp. 86-88 and 179. Unknown: the tool sizes. Picture: Fig. 19 of the book.
Iniciante
Unknown
Instruções
1
1
Bend and file the turning tools
Bend and file the turning tools
Make the turning tools of soft steel strip: bend each near its end and file the edge to suit. Make broad tools filed to a curve, for finishing concave surfaces; one or two narrow tools with a curved edge, which cut faster; and a small square tool. Keep the filing at its own bench so steel dust does not get into the clay. Ours: mild steel flat bar. Not given: the strip sizes.
Materiais para este passo:
Barra chata de aço macio1 turning toolsFerramentas necessárias:
Serra de arco para metais
Martelo
Bigorna
Lima para metal2
2
Make the board and turning stick
Make the board and turning stick
Cut a soft pine board 8 or 10 inches wide and 2 feet high, to stand upright at the back of the wheel frame opposite the potter, screwed on or set in a socket so it can be removed. Make the turning stick from a broomstick with a sharpened nail in its end; its point presses into the board at any height and the hand holding the tool rests on it, like a painter's mahl-stick. Ours: a wooden dowel for the broomstick.
Materiais para este passo:
Tábua de pinho1 board support
Cavilha de madeira1 turning stick
Pregos de ferro1 stick pointFerramentas necessárias:
Serra de arco para metais
Lima para metal
Martelo3
3
Cut the ribs
Cut the ribs
Cut a piece of wood, called a rib, to the exact shape of the inside of the pot to be made; it smooths the inside while the wheel turns. Make one for each shape. Ours: hardwood.
Materiais para este passo:
Prancha de madeira dura1 ribsFerramentas necessárias:
Serra de arco para metais
Lima para metalMateriais
5- 1 turning toolsReferência
- 1 board supportReferência
- 1 turning stickReferência
- 1 stick pointReferência
- 1 ribsReferência
Materiais de Blueprints conectados

10% de atribuição
Mild Steel Bar Stock Forged from an Ingot
por Forge
Moderno
46
0
0
0
5
0

10% de atribuição
Pine Boards with a Chainsaw Mill
por Woody
Marcenaria
47
0
0
0
1
0

10% de atribuição
Riven Hardwood Dowels with a Dowel Plate
por Woody
Marcenaria
59
0
0
0
1
0

10% de atribuição
Forging Iron Nails by Hand — Drawing, Cutting, and Heading
por Forge
Unhas
63
0
0
0
3
0
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
