Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Hollow-Staff Plunger Churn: A Plunger in a Perforated Inner Cylinder Draws Air Down Its Staff on the Up Stroke
Buttercup

Criado por

Buttercup

11. novembro 2026IE
9
0
0
0
0

Hollow-Staff Plunger Churn: A Plunger in a Perforated Inner Cylinder Draws Air Down Its Staff on the Up Stroke

William Hamilton of St. Catharine, Missouri, received US 31,715, dated 19 March 1861, for a plunge churn with a perforated cylinder standing inside the tub. A bevelled plunger fits the cylinder like a piston on a hollow staff with a valve at its foot. Pulled up fast, it leaves a partial void below that the milk cannot fill quickly through the holes, so the valve opens and air rushes down the staff; pushed down, the valve shuts and the air is driven through the milk, which is thrown in and out through the holes against the tub's wall. The patent gives no sizes; every size here is ours.
Iniciante
About 1 day

Instruções

1

Why air is drawn in on the up stroke

A carregar o notebook Jupyter…
2

A valve in a close-fitting dash, six weeks before

Stevens's valve lets cream through his dash. Hamilton's lets air down a hollow staff, and his plunger works in a perforated cylinder.
3

Read US 31,715

"On the descent of the dasher said valve closes, and such admitted fresh air is forcibly made to permeate the body of milk and to abruptly counteract its tendency to fill the partial void below the dasher."
4

Tub A and inner cylinder B

Use a 20-litre food-grade bucket as the tub A and cut a 12 mm HDPE lid to it with a 24 mm hole in the middle. Cut a strip of 1 mm stainless sheet 320 mm wide and 645 long, drill twelve rows of 6 mm holes along it 25 mm apart, 36 to a row, the rows staggered, and roll it into a cylinder B 200 mm across, riveting the lap.

Materiais para este passo:

Balde de 20 litrosBalde de 20 litros1 peça
Chapa de PEADChapa de PEAD1 peça
Chapa de aço inoxidávelChapa de aço inoxidável1 peça
Rebites cegosRebites cegos8 peças

Ferramentas necessárias:

BússolaBússola
Serra tico-ticoSerra tico-tico
Conjunto de brocas de páConjunto de brocas de pá
Tesoura de chapaTesoura de chapa
Berbequim sem fiosBerbequim sem fios
Jogo de brocasJogo de brocas
Kit de rebitadoraKit de rebitadora
Limas (lima de mão)Limas (lima de mão)
5

Print the feet (three)

A foot that holds the cylinder 15 mm off the floor: 28 mm across, 25 high, with a slotted socket for the cylinder's edge. Print three. PETG, 0.2 mm layers, 30 % infill, 4 walls.
Arquivo de designSTLCC0 - Free
6

Print the plunger C

The plunger: 196 mm across, bevelled on both faces from 120 mm at its hub to its 6 mm rim, with a hub 32 mm across and a 22.2 mm bore for the staff. PETG, 0.2 mm layers, 30 % infill, 4 walls.
Arquivo de designSTLCC0 - Free
7

Print the valve seat

The seat glued to the staff's foot under the plunger: 32 mm across, 6 thick, 19 mm bore. PETG, 0.2 mm layers, 30 % infill, 4 walls.
Arquivo de designSTLCC0 - Free
8

Staff D, plunger C, valve b and handle

Cut a 22 mm stainless tube with a 19 mm bore 600 mm long as the hollow staff D. Glue the plunger on it 25 mm above its foot with silicone and pin it, and glue the valve seat to its foot. Cut a 30 mm disc of 2 mm natural rubber sheet as the valve b and fix it under the seat by one edge with a small stainless pin, so it hangs open when pulled down and lies shut when pushed up. Turn a hardwood T handle 240 mm long and fit it on the staff's top, leaving the tube's mouth open.

Materiais para este passo:

Tubo de aço inoxidávelTubo de aço inoxidável1 peça
Filamento PETGFilamento PETG1 peça
Vedante de siliconeVedante de silicone1 peça
ContrapinoContrapino1 peça
Placa de borracha naturalPlaca de borracha natural1 peça
Varão de aço inoxidávelVarão de aço inoxidável1 peça
Tábua de madeira de leiTábua de madeira de lei1 peça
Cola de madeiraCola de madeira1 peça
Cavilhas de madeira duraCavilhas de madeira dura1 peça

Ferramentas necessárias:

Impressora 3D de filamento (FDM)Impressora 3D de filamento (FDM)
Serra de arco para metaisSerra de arco para metais
Limas (lima de mão)Limas (lima de mão)
Torno de bancadaTorno de bancada
Berbequim sem fiosBerbequim sem fios
Jogo de brocasJogo de brocas
Torno de madeiraTorno de madeira
Tesoura de chapaTesoura de chapa
9

The build in 3D

FreeCAD model of this build, cut open: the bucket, the perforated inner cylinder on its feet, the bevelled plunger on its hollow staff with the valve seat below, the lid and the T handle.
Arquivo de designBLENDCC0 - Free
10

Churn and gather

Stand the cylinder on its feet in the bucket and pour about 12 litres of heavy cream at about 15 °C, checked with the thermometer, into it; it runs out through the holes to fill the bucket. Put the plunger in, the lid over the staff, and work it up and down briskly, timing it. When the butter comes, lift out the plunger and the cylinder, then give the cream a few gentle strokes with the plunger to gather the butter. Take it out, pour the buttermilk into a bowl, wash the butter in cold water until it runs clear, salt and weigh it.

Materiais para este passo:

Natas para baterNatas para bater12 l
Sal marinho grossoSal marinho grosso1 peça
ÁguaÁgua1 peça

Ferramentas necessárias:

Termómetro de sonda permanenteTermómetro de sonda permanente
CronómetroCronómetro
Balança digital de cozinhaBalança digital de cozinha
Taça grande de aço inoxidávelTaça grande de aço inoxidável
11

Troubleshooting

Plunger churn troubleshooting.

Flow

Loading...
12

History and honest limits

**William Hamilton** of St. Catharine, Linn County, Missouri, US 31,715, 19 March 1861, "Churn". He claimed, in a plunger churn with a hollow staff and air valve and the dasher's cylinder inside a tub with a milk space between, "a reticulated dasher cylinder or inner case so perforated as that a constant communication is established through the meshes of the inner cylinder between the inner and outer cylinders both above and below the dasher". He wrote that three to five minutes suffice and good cream makes butter in two; we have not tested that. He left the valve's form open ("any suitable valve"); ours is a rubber flap. The patent gives no sizes; every size here is ours.

Materiais

16

Ferramentas necessárias

16

Ficheiros de design

4

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...