Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Horse Knee-Cap: Cupped Leather Block, Cloth Shield and Flock-Stuffed Chamois Roll (Hasluck, Saddlery, 1904)
Tex

Criado por

Tex

13. novembro 2026FO
4
0
0
0
0

Horse Knee-Cap: Cupped Leather Block, Cloth Shield and Flock-Stuffed Chamois Roll (Hasluck, Saddlery, 1904)

A knee-cap protects a horse's knee from knocks and falls. This one is from Paul N. Hasluck's Saddlery (1904): a leather block beaten into a cup, set on a cloth or leather shield, a flock-stuffed chamois roll along the top strap, and a strap below the knee. Every size is his. He notes it is often better to buy the pads, but shows how to make them.
Intermediário
About 1 day

Instruções

1

Cutting list

A carregar o notebook Jupyter…
2

Read Saddlery, ch. X

"Knee-caps are of felt, fawn rugging, kersey cloth, union, buff leather, black rubber, etc."
3

Beat the knee block

With no press, damp some half-curried leather and beat it, as a shoemaker beats boot soles, until it takes a hollow cup shape. Let it dry, then cut it to a wide oval about 5 in by 4 in.

Materiais para este passo:

Couro curtido ao vegetalCouro curtido ao vegetal1 peça
Água doceÁgua doce1 peça

Ferramentas necessárias:

MarteloMartelo
Ferro de coloFerro de colo
Faca para couroFaca para couro
4

Cut and bind the shield

Make the cloth, kersey or leather about 8 in at the top and 9 in deep, and round the bottom. Bind all of it except the straight top with patent binding or cloth; buff leather need not be bound.

Materiais para este passo:

Folha de feltro de lãFolha de feltro de lã1 peça
Tira de debrumTira de debrum1 peça
Fio de linhoFio de linho1 peça
Cera de abelhaCera de abelha1 peça

Ferramentas necessárias:

TesouraTesoura
Fita métricaFita métrica
SovelaSovela
Duas agulhas de correeiroDuas agulhas de correeiro
5

Fit the block

Put the leather block on the centre with a piece of shaped cardboard under it, paste the two together and press the cloth down into the hollow. Stitch the block to the cloth about 1-1/4 in from the top and 1-1/2 in from the bottom.

Materiais para este passo:

Cartão coladoCartão colado1 peça
Cola de farinha de trigoCola de farinha de trigo1 peça
Fio de linhoFio de linho1 peça
Cera de abelhaCera de abelha1 peça

Ferramentas necessárias:

Faca para couroFaca para couro
SovelaSovela
Duas agulhas de correeiroDuas agulhas de correeiro
6

Make the top strap

Cut a piece of leather 1-1/8 in wide and 1 in longer at each end than the cloth at the top. Make a hole at each end 1 in from the point for a 5/8 in strap. Put a chape, buckle and loop in the hole at one end and a 5/8 in strap 9 in long in the other, and stitch both firmly.

Materiais para este passo:

Couro para arreiosCouro para arreios1 peça
Fivela de latão com agulhaFivela de latão com agulha1 peça
Fio de linhoFio de linho1 peça
Cera de abelhaCera de abelha1 peça

Ferramentas necessárias:

Faca para couroFaca para couro
Vazador para couroVazador para couro
SovelaSovela
Duas agulhas de correeiroDuas agulhas de correeiro
7

Make the padded roll

Cut chamois the same length and width as the strap. With it hanging down in front of the knee-cap and the three edges together, stitch it all along through the top leather and the cloth. Turn the chamois over the top towards the bottom and stitch it along the bottom side of the top strap, rather slack. Make two rows of stitches across the centre, leaving an opening of about 1-1/2 in exactly in the centre. Stuff both parts of the roll from each end with flock, then close the ends by stitching chamois and top leather together.

Materiais para este passo:

CamurçaCamurça1 peça
Enchimento de lãEnchimento de lã1 peça
Fio de linhoFio de linho1 peça
Cera de abelhaCera de abelha1 peça

Ferramentas necessárias:

TesouraTesoura
SovelaSovela
Duas agulhas de correeiroDuas agulhas de correeiro
8

Fit the bottom strap

Put a 5/8 in chape buckle and loop at the bottom of the block pad, slanting slightly downwards, with a strap 10 in long on the opposite side. For a pair, reverse the buckles so each is on the outside.

Materiais para este passo:

Couro para arreiosCouro para arreios1 peça
Fivela de latão com agulhaFivela de latão com agulha1 peça
Fio de linhoFio de linho1 peça
Cera de abelhaCera de abelha1 peça

Ferramentas necessárias:

Faca para couroFaca para couro
SovelaSovela
Duas agulhas de correeiroDuas agulhas de correeiro
9

Troubleshooting

Knee-cap troubleshooting.

Flow

Loading...
10

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter X, "Knee-caps and Miscellaneous Articles", pp. 81-84, Figs. 33-35; every fraction was read on the scan. He also suggests a better block cut with a tongue up under the top strap, and a fastening with two squares and a 5/8 in rubber ring; those are not shown here. The thread, the tools and the metric figures are ours.

Materiais

12

Ferramentas necessárias

8

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...