ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Straight Drawers with Printable Pattern (Baldt, 1916)
Tex

Criado por

Tex

20. novembro 2026FO
2
0
0
0
0

Straight Drawers with Printable Pattern (Baldt, 1916)

Laura Baldt's straight drawers (Clothing for Women, 1916): knee length, one piece per leg with no side seam, waist fulness in a dart over the hip, on a buttoned band. Draft them to your own measures from your Wardrobe, or print six of today's sizes nested (waist 68-88 cm), seams on; then lay out and cut.
Iniciante
About half a day

Instruções

1

Draft your pattern

Draft Baldt's drawers to your own measures from your Wardrobe (waist, seat and drawers length), or in today's sizes B84-B104, then print on A4 or US Letter.

Materiais para este passo:

PapelPapel1 as required

Ferramentas necessárias:

Fita métricaFita métrica
Impressora de jato de tintaImpressora de jato de tinta
TesouraTesoura
Fita de máscaraFita de máscara
2

Lay out and cut

Cloth laid double, cut ends together, selvedges meeting; bottom edge of the pattern to the cut ends, so both legs come at once (Baldt p.286). Seams and hem are on the pattern. Cut the band lengthwise, 5 cm wide and your waist + 7.5 cm long; cut the placket 23-28 cm down the centre of one dart. Ours: about 1.5 m of 150 cm cloth.
Passo 2 - Image 1

Materiais para este passo:

Tecido de algodão (leve)Tecido de algodão (leve)1 1.5 m x 150 cm (ours)
Botão cosidoBotão cosido1 peça

Ferramentas necessárias:

TesourãoTesourão
Alfinetes de costuraAlfinetes de costura
Fita métricaFita métrica

Materiais

3

Ferramentas necessárias

6

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...