Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Adjustable-Valve Dash Churn: Hinged Perforated Wings Shut Going Down, Open Coming Up, Slides Set How Big the Holes Are
Buttercup

Criado por

Buttercup

12. novembro 2026IE
10
0
0
0
0

Adjustable-Valve Dash Churn: Hinged Perforated Wings Shut Going Down, Open Coming Up, Slides Set How Big the Holes Are

Cicero D. Van Allen of Syracuse, New York, received US 32,907, dated 23 July 1861, for a square plunge churn whose dash is a frame nearly filling the body, with two perforated wings hinged in it. Going down they shut and the cream is forced through their holes; coming up they drop open, so the dash rises easily. A perforated slide under each wing, held by a set screw in a slot, can be moved to make the holes smaller or larger. A lever works the dash on a standard that folds down for carrying. The patent gives no sizes; every size here is ours.
Intermediário
About 2 days

Instruções

1

How much the slides close the holes

A carregar o notebook Jupyter…
2

A valve that shuts going down and opens coming up, six months before

Stevens has one centre valve. Van Allen hinges the whole dash as two wings and makes their holes adjustable.
3

Read US 32,907

"The object of the slides is to enlarge or diminish the holes in the valves or wings to facilitate the churning or breaking of cream. The object of the valves or wings opening as the dasher is raised, is, to allow the cream or butter to pass through the dash—thereby relieving the dasher of the entire weight of the cream or butter."
4

Square churn, feet and cover

Glue up a square hardwood box 280 x 280 mm inside and 400 deep from 20 mm boards, the joints sealed with silicone sealant, and screw two hardwood feet 25 x 400 x 180 mm with arched cutouts under its ends. Cut a hardwood or HDPE cover to fit over the top, with a 34 mm square hole at the centre for the rod.

Materiais para este passo:

Tábua de madeira de leiTábua de madeira de lei4 peças
Cola de madeiraCola de madeira1 peça
Vedante de siliconeVedante de silicone1 peça
Parafusos para madeiraParafusos para madeira30 peças
Chapa de PEADChapa de PEAD1 peça

Ferramentas necessárias:

Serra de mesaSerra de mesa
Serra tico-ticoSerra tico-tico
Berbequim sem fiosBerbequim sem fios
Jogo de brocasJogo de brocas
Sargento de barraSargento de barra
Conjunto de chaves de fendasConjunto de chaves de fendas
Fita métricaFita métrica
5

Dash A: rod B, frame E, wings G, slides I, stop H

Make a hardwood frame E 274 mm square of 30 x 20 strips with a centre bar 30 wide. Plane a hardwood rod B 30 mm square, 505 long, mortise it into the centre bar, and bore holes C 10.4 mm across near its top for the lever pin. Cut two 6 mm HDPE wings G 92 x 266 mm, each with six 20 mm holes K, and hang each on a butt hinge along a side of the frame so it shuts up against the frame. Cut two 3 mm HDPE slides I 80 x 250 with six matching holes and a slot L, and fix each under its wing with an M5 set screw J through the slot. Screw a hardwood stop H 30 x 120 mm under the centre bar so its ends catch the wings when they have opened about 45 degrees.

Materiais para este passo:

Tábua de madeira de leiTábua de madeira de lei1 peça
Cola de madeiraCola de madeira1 peça
Parafusos para madeiraParafusos para madeira8 peças
Chapa de PEADChapa de PEAD1 peça
Dobradiça de livro para móvelDobradiça de livro para móvel2 peças
Parafusos de máquinaParafusos de máquina2 peças

Ferramentas necessárias:

Serra de mesaSerra de mesa
Conjunto de formões para madeiraConjunto de formões para madeira
Serra tico-ticoSerra tico-tico
Berbequim sem fiosBerbequim sem fios
Jogo de brocasJogo de brocas
Conjunto de brocas de páConjunto de brocas de pá
Limas (lima de mão)Limas (lima de mão)
Conjunto de chaves de fendasConjunto de chaves de fendas
6

Standard, lever and pin D

Cut a hardwood standard 40 x 30 mm, 660 tall, and hang it on a butt hinge at its foot on one of the feet, 70 mm out from the box's end, so it folds down flat against the box for packing; hold it upright with a hook from a screw eye on the box's side (the patent's staple O). Bore it 10.4 mm across 20 mm from its top. Shape a hardwood lever 950 x 30 x 24 mm with a handle at one end, bore it near the other for a 10 mm bolt to the standard, and cut a slot 40 x 12 mm through it over the rod. Pass the rod up through the cover and the slot, and pin it with a 10 mm stainless pin D through a hole C.

Materiais para este passo:

Tábua de madeira de leiTábua de madeira de lei1 peça
Dobradiça de livro para móvelDobradiça de livro para móvel1 peça
Olhal de roscaOlhal de rosca2 peças
Sortido de parafusos sextavadosSortido de parafusos sextavados1 peça
Porca borboletaPorca borboleta1 peça
Varão de aço inoxidávelVarão de aço inoxidável1 peça
ContrapinoContrapino2 peças

Ferramentas necessárias:

Serra de mesaSerra de mesa
Serra tico-ticoSerra tico-tico
Conjunto de formões para madeiraConjunto de formões para madeira
Berbequim sem fiosBerbequim sem fios
Jogo de brocasJogo de brocas
Serra de arco para metaisSerra de arco para metais
Chave inglesa ajustávelChave inglesa ajustável
Conjunto de chaves de fendasConjunto de chaves de fendas
7

The build in 3D

FreeCAD model of this build, the box cut open at the front: the dash frame with its two hinged wings (shown open), the slides under them and the stop, the rod, the cover, the feet, the hinged standard and the lever.
Arquivo de designBLENDCC0 - Free
8

Set the slides and churn

Pour about 15 litres of heavy cream at about 15 °C, checked with the thermometer, into the churn. Loosen the set screws and move the slides to leave the holes half open to start; put the dash in, the cover on, and pin the lever to the rod. Work the lever up and down steadily, timing it. If the dash is too hard to push down, open the holes further; if the cream is not broken, close them more. When the butter comes, lift the dash out, take out the butter, pour the buttermilk into a bowl, wash the butter in cold water until it runs clear, salt and weigh it. Fold the standard down to store the churn.

Materiais para este passo:

Natas para baterNatas para bater15 l
Sal marinho grossoSal marinho grosso1 peça
ÁguaÁgua1 peça

Ferramentas necessárias:

Termómetro de sonda permanenteTermómetro de sonda permanente
CronómetroCronómetro
Balança digital de cozinhaBalança digital de cozinha
Taça grande de aço inoxidávelTaça grande de aço inoxidável
Conjunto de chaves de fendasConjunto de chaves de fendas
9

Troubleshooting

Adjustable-valve churn troubleshooting.

Flow

Loading...
10

History and honest limits

**Cicero D. Van Allen** of Syracuse, Onondaga County, New York, US 32,907, 23 July 1861, "Churn". He claimed "the combination of the perforated adjustable slide I with the perforated dasher A". He made his churn of wood or other material, square or round. His drawing shows a pyramid-shaped cover and a standard with a staple; ours are a flat cover and a hook to a screw eye. The patent gives no sizes; every size here is ours.

Materiais

15

Ferramentas necessárias

16

Ficheiros de design

1

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...