KUNST
SCHÖNHEIT & WELLNESS
HANDWERK
KULTUR & GESCHICHTE
UNTERHALTUNG
UMFELD
ESSEN & GETRÄNKE
REVERSE ENGINEERING
WISSENSCHAFTEN
SPORT
TECHNOLOGIE
WEARABLES
Double-Concave Perforated Disk Dasher: Two Tin Domes With Half-Covered Holes
Marsh improved the dasher of "the plain old-fashioned churns so long used by farmers generally."
Joseph Marsh of Petersburg, Menard County, Illinois, received US 7,527, dated 30 July 1850, for a "double-concave perforated discoid churn-dasher": two convex pieces of tin or other suitable material, "perforated and placed on the upright," about six inches across with holes about three-quarters of an inch, "the several holes in B made to cover about half of the several holes in C." It works in a straight-sided churn by raising and pushing it, or by a lever.
This rung works out the open area, then prints the two domes and spacer, fits them to a staff, and makes butter.
Anfänger
About 1 hour, plus printing
Anweisungen
1
1
Half-covered holes
Half-covered holes
Jupyter-Notebook wird geladen …
2
2
An improved common dasher before it
An improved common dasher before it
The embedded blueprint improves the common dasher with pitched oars. Marsh uses two perforated domes whose holes half overlap.
3
3
Read US 7,527
Read US 7,527
"The convex pieces of tin, as shown at B and C, are or may be six inches in diameter, and the several holes in the same about three-quarters of an inch in diameter, the several holes in B made to cover about half of the several holes in C."
4
4
Print the domes
Print the domes
Print the two domes: 152 mm across with 19 mm holes, the second turned so its holes half cover the first's. Print the spacer ring. Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Materialien für diesen Schritt:
PETG-Filament1 StückBenötigte Werkzeuge:
FDM-3D-Drucker5
5
Print the first dome
Print the first dome
The first dome, printed as step 4 describes.
6
6
Print the second dome
Print the second dome
The second dome, printed as step 4 describes.
7
7
Print the spacer ring
Print the spacer ring
The spacer ring, printed as step 4 describes.
8
8
Assemble
Assemble
Glue the two domes back to back on the spacer ring, convex sides out, holes half overlapping, and glue them on the foot of a 12 mm hardwood dowel staff.
Materialien für diesen Schritt:
Hartholzdübel1 Stück
Zweikomponentenepoxid1 StückBenötigte Werkzeuge:
Handsäge
Schleifpapier9
9
The churn
The churn
Use a straight-sided food-grade container about 160 mm across and 300 mm tall, so the dasher fits closely without rubbing, as he said. Drill its lid for the staff.
Materialien für diesen Schritt:
Vorratsbehälter in Lebensmittelqualität1 StückBenötigte Werkzeuge:
Akkubohrschrauber
Lochsägen-Set10
10
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the straight-sided churn cut away to show the two perforated domes back to back on the staff, and a lever.
11
11
Dash and make butter
Dash and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 2 litres. Work the staff up and down; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Materialien für diesen Schritt:
Schlagsahne2000 ml
Grobes Meersalz1 Stück
Wasser1 StückBenötigte Werkzeuge:
Einsteck-Fühlerthermometer
Stoppuhr
Digitale Küchenwaage
Große Rührschüssel aus Edelstahl12
12
A dasher that sticks or splashes
A dasher that sticks or splashes
Double-concave disk dasher troubleshooting.
Flow
Loading...
13
13
History and honest limits
History and honest limits
**Joseph Marsh** of Petersburg, Menard County, Illinois, received US 7,527, dated 30 July 1850. He wrote that it creates "a suction of atmosphere through the milk ... that excels any improvement in churns of ancient or modern invention"; that is his claim. His churn was straight inside "instead of cone-shaped." He claimed the double-concave perforated discoid churn-dasher.
**Honest limits.** Printed domes stand in for his tin. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Materialien
7- 1 StückPlatzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
- Platzhalter
- 2000 mlPlatzhalter
- 1 StückPlatzhalter
- 1 StückPlatzhalter
Benötigte Werkzeuge
9- Platzhalter
- Platzhalter
- Platzhalter
- 1 vendor sell this, none ship to you yetPlatzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
- Platzhalter
Designdateien
4Dieser Bauplan stellt her
Verwandte Blueprints
Diese Blueprints teilen Wissen — Techniken, Materialien oder Prinzipien
Reacting Churn Dasher: Two Rows of Oars Pitched Opposite Ways
von TheChef
ESSEN & GETRÄNKE
37
0
0
0
0
0
Valved Hollow-Staff Plunger Churn: A Valve at the Top, Air Forced Out at the Foot
von TheChef
ESSEN & GETRÄNKE
37
0
0
0
0
0
Valveless Cone Air Dasher: A Hollow Cone and Four Tubes, Nothing to Wear Out
von YourGrandma
ESSEN & GETRÄNKE
34
0
0
0
0
0
CC0 Gemeinfrei
Dieser Blueprint ist unter CC0 veröffentlicht. Sie dürfen dieses Werk für jeden Zweck frei kopieren, ändern, verbreiten und verwenden, ohne um Erlaubnis zu fragen.
Unterstützen Sie den Maker, indem Sie Produkte über seinen Blueprint kaufen, wo er eine Maker-Provision von Anbietern festgelegt, verdient. Oder erstellen Sie eine neue Iteration dieses Blueprints und verbinden Sie ihn in Ihrem eigenen Blueprint, um Einnahmen zu teilen.