예술
뷰티 및 웰니스
공예
문화 및 역사
엔터테인먼트
환경
음식 및 음료
역공학
과학
스포츠
기술
웨어러블
Wedge-Plunger Potato Strainer: Turn a Wedge, the Mash Comes Out the Sides
A plunger pushed straight down a strainer packs the potato and forces it only through the bottom.
René Sebille of Baltimore received US 140,169, dated 24 June 1873, for a potato masher and strainer: a cylindrical strainer perforated all round its side and bottom, "through which the potato-mash can issue as fast as it is produced," and a plunger whose end is a wedge with two bevel faces, turned back and forth by two handles while pressed down, so it can be worked "with the least possible amount of power."
This rung works out where the outlet area is, then prints the strainer and plunger and times a batch.
초급
About 1 hour, plus printing
안내
1
1
Side and bottom outlets
Side and bottom outlets
Jupyter 노트북 불러오는 중…
2
2
A tube and plunger before it
A tube and plunger before it
The embedded blueprint pushes a flat plunger down a tube. Sebille perforates the sides too and turns a wedge instead of pushing.
3
3
Read US 140,169
Read US 140,169
"The plunger is then rotated back and forth by means of the handles D D, at the same time that a certain amount of pressure is exerted downward upon it. By this motion the bevel faces c c of the plunger displace and mash the potatoes, and force them through the openings a of the strainer, the peculiar double-bevel-faced shape of the plunger making it easy to accomplish the desideratum with the smallest amount of power, and yet very expeditiously."
4
4
Print the strainer and plunger
Print the strainer and plunger
Print the perforated strainer with its handles (/uploads/blueprints/wedge-plunger-potato-strainer-strainer.stl) and the plunger with its wedge end and cross handle (/uploads/blueprints/wedge-plunger-potato-strainer-plunger.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
이 단계의 재료:
PETG 필라멘트1 개필요한 도구:
FDM 3D 프린터5
5
The build in 3D
The build in 3D
FreeCAD model of this build, not of the patent: the 80 mm strainer with 288 side holes and a bottom grid of 4 mm holes and two handles, and the plunger with its double-bevel wedge and cross handle.
6
6
Cook the potatoes
Cook the potatoes
Boil 500 g of potatoes, peeled and quartered, for about 20 minutes until a knife slides in; drain.
이 단계의 재료:
감자1 개
물1 개필요한 도구:
깊은 편수 냄비
디지털 주방 저울7
7
Turn and press
Turn and press
Stand the strainer in a bowl, fill it with hot potato, and turn the plunger to and fro with light pressure. Time the batch; then repeat pushing straight down only.
필요한 도구:
큰 스테인리스강 믹싱볼
스톱워치8
8
A plunger that jams, a strainer that clogs
A plunger that jams, a strainer that clogs
Wedge-plunger potato strainer troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
**René Sebille** of Baltimore filed US 140,169 on 5 May 1873; it is dated 24 June 1873. The strainer can be held by its handles, given legs to stand over a dish, or fastened to a table; the plunger is cylindrical for most of its length to bear on the sides, though the wedge end with a short cylinder may be fixed to a long handle. He claimed the double-bevel plunger with the strainer.
**Honest limits.** A printed strainer stands in for his tin one. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times are the result.
이 블루프린트로 만드는 것
관련 블루프린트
이 블루프린트들은 지식을 공유합니다 — 기술, 재료 또는 원리
CC0 퍼블릭 도메인
이 블루프린트는 CC0로 공개되었습니다. 어떤 목적으로든 자유롭게 복사, 수정, 배포 및 사용할 수 있습니다.
제품 구매를 통해 메이커를 지원하세요. 판매자가 설정한 메이커 커미션 을 받거나, 이 블루프린트의 새로운 반복을 만들어 연결로 포함시킬 수 있습니다.