IṢẸ́ ỌNÀ
ẸWÀ ÀTI ÌLERA
IṢẸ́ ỌWỌ́
ÀṢÀ ÀTI ÌTÀN
ÌṢERÉ
ÀYÍKÁ
OÚNJẸ ÀTI OHUN MÍMU
REVERSE ENGINEERING
SÁYẸ́ǸSÌ
ERÉ ÌDÁRAYÁ
ÌMỌ̀-Ẹ̀RỌ
ÀWỌN OHUN WÍWỌ̀
The Perforated-Character Ticket Punch: A Figure Pricked in Pins, So the Print Stays Readable
A conductor's punch cut out a whole figure from the ticket, and when he punched over a printed number, that number was lost, which caused confusion when the tickets were counted.
William J. Phelps of Springfield, Massachusetts, received US 79,498, dated 30 June 1868, for "such construction of the die and counter-die of a punch, whereby the printed or written matter upon a ticket or coupon will still remain plain and discernible, even after the said ticket or coupon has been cancelled or punched." The die's lower end is cut away to leave a group of projections forming the figure, a triangle in his drawing, and the counter-die has matching perforations; the projections may be made longer on one side "to give a shearing cut, or to enable some of the projections to partially make their cut before the others".
This rung compares the force for a pin group and a solid figure and the gain from staggering, then files a pin-group die and counter-die and punches over printed figures.
Ilọsíwájú
About 6 hours
Ìlànà
1
1
Pins against a solid shape
Pins against a solid shape
Ń ṣí ìwé Jupyter…
2
2
A punch body before it
A punch body before it
The embedded blueprint is Hill's punch of the same date. Phelps keeps his own body and changes the die, so the character is pricked in holes instead of cut out.
3
3
Read US 79,498
Read US 79,498
"In most of the railroad-corporations, the conductors upon the different trains have different-shaped dies in their punches, each conductor's punch having a different-shaped die from any of the others, and many of these dies are of such form that when a conductor punches a ticket to cancel it, some important figure or character upon the coupon or ticket is often cut out and lost."
"It is obvious that the projections o o may be somewhat longer upon one side of the die, and decreasing in length towards the other side, in order to give a shearing cut, or to enable some of the projections o o to partially make their cut before the others, thus partially relieving the strain required to make the perforation of the whole series."
4
4
Make the pin die and punch over print
Make the pin die and punch over print
**Counter-die.** Mark a small triangle on a steel plate and drill six 1 mm holes along its outline, reaming them clean. Relieve the plate underneath so the chips fall through.
**Die.** File the end of a 6 mm steel rod down, leaving six 1 mm pins standing in the same pattern, located by clamping the drilled counter-die on the rod's end as a template. Leave the pins on one side 0.3 mm longer, as Phelps allowed.
**Fit.** Mount the die in a punch body, the free-spindle punch or the pivoted one, and the counter-die in the other lever. Harden and temper both.
**Test.** Print or write a row of figures on card and punch over them with the pin die and with a solid-shape die. Check which figures can still be read, and read the squeeze for each with the spring scale.
Àwọn ohun èlò fún ìgbésẹ̀ yìí:
Ọ̀pá Róbótó Irin Rírọ̀0.1 mítà
Pẹpẹ irin rírọ̀1 ẹyọ
Bébà Líle1 ẹyọÀwọn irinṣẹ́ tí a nílò:
Ẹ̀rọ Ìlùkòkò Aláìlókùn
Àkójọ Orí Ìlùkòkò
Àkójọ Ìfá Kékeré
Àwọn Ìfá (Ìfá Ọwọ́)
Ìdìmú Tábìlì
Àwọn clamp
Ọ̀pá Iná Pùróféènì
Ẹ̀rọ Ìwọ̀n Agbára (Òṣùwọ̀n Ìsúnkì)
Òṣùwọ̀n Kálípà Díjítà Ìnṣì 6
Ìbọ̀wọ́ Iṣẹ́ Awọ
Gílásì Ààbò Tí Ó Mọ́5
5
A pin die that bends, misses or leaves burrs
A pin die that bends, misses or leaves burrs
Perforated-character ticket punch troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
**William J. Phelps** of Springfield, Hampden County, Massachusetts, received US 79,498, dated 30 June 1868. The punch's body was the one of his 1867 patent; the spindle d was flat down to the shoulder s, the counter-die c sat in the lower jaw of the body C, the projections might be prismatic or cylindrical, and any letter, figure or character could be used. He noted the punch was as compact as any and could be made as cheaply as the ordinary punch. His claim is the die and counter-die of a group of projections and perforations formed into any letter, figure or character.
**Honest limits.** A hand-filed pin die stands in for his milled one. The notebook uses a simple shear formula and an ideal share between stages; its values are examples. Your readable figures are the result.
Àwọn ohun-èlò
3- 0.1 mítàÀyè
- 1 ẹyọÀyè
- 1 ẹyọÀyè
Àwọn irinṣẹ́ tó nílò
11- 1 vendor sell this, none ship to you yetÀyè
- Àyè
- Àyè
Blueprint tó jọra
Àwọn blueprint wọ̀nyí pín ìmọ̀ — ọ̀nà, ohun-èlò tàbí ìlànà
The Free-Spindle Ticket Punch: A Loose Spindle Lifted by a Spring, Close to the Pivot
láti ọwọ́ Emma
Àwọn Irinṣẹ́ Irin
29
0
0
0
0
0
The Die-Spindle Ticket Punch: A Shaped Die on a Pivot, a Slot for the Ticket
láti ọwọ́ Martin
Àwọn Irinṣẹ́ Irin
23
0
0
0
0
0
The Coupon-Stringing Ticket Punch: Every Coupon Holed for the Counting Wire
láti ọwọ́ Mark
Àwọn Irinṣẹ́ Iṣẹ́ Bébà
17
0
0
0
0
0
CC0 Àgbègbè Gbogbogbò
Blueprint yìí ti jáde lábẹ́ CC0. O lè ṣe àdàkọ, yí padà, pín, àti lò láìsí ìyọ̀ǹda.
Ṣàtìlẹ́yìn Olùṣẹ́dá nípa rírà àwọn ọjà nipasẹ̀ Blueprint wọn Ẹ̀san Olùṣẹ́dá tí àwọn Olùtajà gbé kalẹ̀, tàbí ṣẹ̀dá àtúnṣe tuntun ti Blueprint yìí kí o sì fi sínú Blueprint rẹ gẹ́gẹ́ bí ìsopọ̀ láti pín owó-wíwọlé.