SZTUKA
Piękno i dobre samopoczucie
RZEMIOSŁO
KULTURA I HISTORIA
ROZRYWKA
ŚRODOWISKO
JEDZENIE I NAPOJE
INŻYNIERIA ODWROTNA
NAUKI
LEKKOATLETYKA
TECHNOLOGIA
URZĄDZENIA DO NOSZENIA
Wedge-Plunger Potato Strainer: Turn a Wedge, the Mash Comes Out the Sides
YourGrandma

Autor

YourGrandma

6. październik 2026IS
1
0
0
0
0

Wedge-Plunger Potato Strainer: Turn a Wedge, the Mash Comes Out the Sides

A plunger pushed straight down a strainer packs the potato and forces it only through the bottom. René Sebille of Baltimore received US 140,169, dated 24 June 1873, for a potato masher and strainer: a cylindrical strainer perforated all round its side and bottom, "through which the potato-mash can issue as fast as it is produced," and a plunger whose end is a wedge with two bevel faces, turned back and forth by two handles while pressed down, so it can be worked "with the least possible amount of power." This rung works out where the outlet area is, then prints the strainer and plunger and times a batch.
Początkujący
About 1 hour, plus printing

Instrukcje

1

Side and bottom outlets

Wczytywanie notatnika Jupyter…
2

A tube and plunger before it

The embedded blueprint pushes a flat plunger down a tube. Sebille perforates the sides too and turns a wedge instead of pushing.
3

Read US 140,169

"The plunger is then rotated back and forth by means of the handles D D, at the same time that a certain amount of pressure is exerted downward upon it. By this motion the bevel faces c c of the plunger displace and mash the potatoes, and force them through the openings a of the strainer, the peculiar double-bevel-faced shape of the plunger making it easy to accomplish the desideratum with the smallest amount of power, and yet very expeditiously."
4

Print the strainer and plunger

Print the perforated strainer with its handles (/uploads/blueprints/wedge-plunger-potato-strainer-strainer.stl) and the plunger with its wedge end and cross handle (/uploads/blueprints/wedge-plunger-potato-strainer-plunger.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.

Materiały do tego kroku:

Filament PETGFilament PETG1 sztuka

Potrzebne narzędzia:

Drukarka 3D z filamentem (FDM)Drukarka 3D z filamentem (FDM)
5

The build in 3D

FreeCAD model of this build, not of the patent: the 80 mm strainer with 288 side holes and a bottom grid of 4 mm holes and two handles, and the plunger with its double-bevel wedge and cross handle.
Plik projektowyBLENDCC0 - Free
6

Cook the potatoes

Boil 500 g of potatoes, peeled and quartered, for about 20 minutes until a knife slides in; drain.

Materiały do tego kroku:

ZiemniakiZiemniaki1 sztuka
WodaWoda1 sztuka

Potrzebne narzędzia:

Rondel o wysokich ściankachRondel o wysokich ściankach
Cyfrowa waga kuchennaCyfrowa waga kuchenna
7

Turn and press

Stand the strainer in a bowl, fill it with hot potato, and turn the plunger to and fro with light pressure. Time the batch; then repeat pushing straight down only.
Krok 7 - Image 1

Potrzebne narzędzia:

Duża misa ze stali nierdzewnejDuża misa ze stali nierdzewnej
StoperStoper
8

A plunger that jams, a strainer that clogs

Wedge-plunger potato strainer troubleshooting.

Flow

Loading...
9

History and honest limits

**René Sebille** of Baltimore filed US 140,169 on 5 May 1873; it is dated 24 June 1873. The strainer can be held by its handles, given legs to stand over a dish, or fastened to a table; the plunger is cylindrical for most of its length to bear on the sides, though the wedge end with a short cylinder may be fixed to a long handle. He claimed the double-bevel plunger with the strainer. **Honest limits.** A printed strainer stands in for his tin one. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times are the result.

Materiały

3
  • Zastępnik
  • 1 sztuka
    Zastępnik
  • 1 sztuka
    Zastępnik

Wymagane narzędzia

5

Pliki projektowe

1

CC0 Domena publiczna

Ten plan jest udostępniany na licencji CC0. Możesz go swobodnie kopiować, modyfikować, rozpowszechniać i wykorzystywać do dowolnych celów, bez konieczności uzyskiwania zgody.

Wesprzyj Makera kupując produkty przez jego plan, za co zarabia Prowizja Makera ustalony przez sprzedawców, lub stwórz nową iterację tego planu i dołącz go jako połączenie w swoim własnym planie, aby dzielić się przychodami.

Dyskusja

(0)

Zaloguj się aby dołączyć do dyskusji

Ładowanie komentarzy...