Industry 4.0 — Computers & Digital Automation (1960)
176 cetak biru tersedia
Cetak Biru (176)
Metal Oxide Varistor: Zinc Oxide with 0.2 % Bismuth Oxide, Sintered Disc (Masuyama 1972)
oleh Ed
Industri
Guitar Strings: Bronze Wound on Steel, Then Heat-Soaked (Stone and Falcone 1977)
oleh Woody
Industri
Neodymium Magnets: Nd-Fe-B Alloy Milled, Pressed in a Field and Sintered (Sagawa 1988)
oleh Forge
Pengerjaan Logam
Barium Ferrite Disc Magnet: Barium Carbonate and Iron Oxide Sintered (Went, Philips 1956)
oleh Charlie
Material
Naphthenic Distillates: Reduced Crude Cut by Viscosity in a Vacuum Tower (Armstrong 1965)
oleh Charlie
Organik
Silicone Sealant: Silicone Oil, Diatomaceous Earth and Methyl Triacetoxysilane (Ceyzeriat 1964)
oleh Charlie
Material
Hydroxyl-Ended Silicone Oil: D4 Opened with Potash, Then Water (Ceyzeriat 1964)
oleh Charlie
Material
Precipitated Silica: Hot Water Glass Carbonated, Then Acidified to pH 6.75 (Allen 1957)
oleh Charlie
Material
Octamethylcyclotetrasiloxane (D4): Silane Hydrolysate Cracked with Potash in Diphenyl Ether (Asahi 1980)
oleh Charlie
Material
Diphenyl Ether: Chlorobenzene and Phenol in Caustic Soda at 400 °C (Dow 1978)
oleh Charlie
Material
Oyster Mushroom Grain Spawn: Boiled Wheat with Lime and Gypsum, 121 °C
oleh Bob
Biologi
PTFE Thread Seal Tape: Paste-Extruded, Calendered, Never Sintered
oleh Emma
Pengerjaan Plastik
Plastic Syringe Set: Moulded Barrel and a Soft Polyethylene Piston
oleh Emma
Cetakan Injeksi
Product Teardown
oleh Pixel
Analisis Produk
Logging Temperature with Python
oleh Ed
Python
Oat Milk
oleh Alchometer
Bebas Laktosa
The Ventilated Pit Latrine
oleh Bob
Biologi
The Air-Jet Loom — Weaving Fabric with Compressed Air at 2,000 Picks Per Minute
oleh Tex
Industry 4.0 — Computers & Digital Automation (1960)
Carbon Fiber — From Polymer Precursor to the Strongest Textile Fiber on Earth
oleh Tex
Industry 4.0 — Computers & Digital Automation (1960)
Warp Knitting — The Fastest Fabric Formation Technology in Textiles
oleh Tex
Industry 4.0 — Computers & Digital Automation (1960)
Nonwoven Spunbond Fabric — Fiber-to-Fabric in One Step Without Spinning or Weaving
oleh Tex
Industry 4.0 — Computers & Digital Automation (1960)
Lyocell (Tencel) — The Closed-Loop Cellulose Fiber That Replaced Toxic Viscose
oleh Tex
Industry 4.0 — Computers & Digital Automation (1960)
Microfiber — Ultra-Fine Synthetic Fibers That Outperform Natural Textiles
oleh Tex
Industry 4.0 — Computers & Digital Automation (1960)
Dyneema (UHMWPE) — The Lightest Fiber Stronger Than Steel
oleh Tex
Industry 4.0 — Computers & Digital Automation (1960)