İşbirliği
SANAT
GÜZELLİK & SAĞLIK
ZANAAT
KÜLTÜR & TARİH
EĞLENCE
ÇEVRE
YİYECEK & İÇECEK
TERS MÜHENDİSLİK
BİLİMLER
SPOR
TEKNOLOJİ
GİYİLEBİLİR ÜRÜNLER
PlanlarCulture And HistoryÇağlarIndustry 3.0 — Assembly Line & Mass Production (1913)

Industry 3.0 — Assembly Line & Mass Production (1913)

362 plan mevcut

Planlar (362)

Boys' Long Trousers with Printable Pattern (Simons, 1945)

Boys' Long Trousers with Printable Pattern (Simons, 1945)

Tex tarafındanFO

Pantolonlar

0
0
0
0
0
0
Men's Shorts with Printable Pattern (Simons, 1945)

Men's Shorts with Printable Pattern (Simons, 1945)

Tex tarafındanFO

Şort

1
0
0
0
0
0
Ladies' Pleated Slacks with Printable Pattern (Simons, 1945)

Ladies' Pleated Slacks with Printable Pattern (Simons, 1945)

Tex tarafındanFO

Pantolonlar

0
0
0
0
0
0
Boy Scout Slip-on Sweater (1917)

Boy Scout Slip-on Sweater (1917)

Tex tarafındanFO

Kazaklar

2
0
0
0
0
0
Red Cross Knitted Sleeveless Sweater (1917)

Red Cross Knitted Sleeveless Sweater (1917)

Tex tarafındanFO

Kazaklar

2
0
0
0
0
0
Straight Drawers with Printable Pattern (Baldt, 1916)

Straight Drawers with Printable Pattern (Baldt, 1916)

Tex tarafındanFO

İç çamaşırı

0
0
0
0
0
0
Kimono Waist with Printable Pattern (Fales, 1917)

Kimono Waist with Printable Pattern (Fales, 1917)

Tex tarafındanFO

Üstler

0
0
0
0
0
0
Trousers with Printable Pattern (Simons, 1916)

Trousers with Printable Pattern (Simons, 1916)

Tex tarafındanFO

Pantolonlar

0
0
0
0
0
0
Six-Gore Skirt with Printable Pattern (Fales, 1917)

Six-Gore Skirt with Printable Pattern (Fales, 1917)

Tex tarafındanFO

Etekler

0
0
0
0
0
0
Shirt-Waist with Printable Pattern (Fales, 1917)

Shirt-Waist with Printable Pattern (Fales, 1917)

Tex tarafındanFO

Üstler

1
0
0
0
0
0
Grape Juice: Concord Grapes Heated, Pressed and Pasteurized Twice Below 180 F (USDA / New York Station, 1939)

Grape Juice: Concord Grapes Heated, Pressed and Pasteurized Twice Below 180 F (USDA / New York Station, 1939)

TheChef tarafındanDK

Alkolsüz İçecekler

0
0
0
0
0
0
Cam-Arm Tubing Cutter: Two Swinging Arms Keep the Wheel and Rollers Evenly Round Any Tube (Lutsker, 1959)

Cam-Arm Tubing Cutter: Two Swinging Arms Keep the Wheel and Rollers Evenly Round Any Tube (Lutsker, 1959)

Forge tarafındanNO

Metal işleme

9
0
0
0
0
0
Sprung-Leg Tubing Cutter: a Bent Rod With a Disk Outside and a Roller Inside, the Handle's Screw Bends One Leg In (Zeiler, 1958)

Sprung-Leg Tubing Cutter: a Bent Rod With a Disk Outside and a Roller Inside, the Handle's Screw Bends One Leg In (Zeiler, 1958)

Forge tarafındanNO

Metal işleme

8
0
0
0
0
0
Slip-Knob Tube Cutter: the Feed Knob Turns the Screw Through Spring-Loaded Plates and Slips Before the Tube Is Crushed (Parker, 1944)

Slip-Knob Tube Cutter: the Feed Knob Turns the Screw Through Spring-Loaded Plates and Slips Before the Tube Is Crushed (Parker, 1944)

Forge tarafındanNO

Metal işleme

10
0
0
0
0
0
Swing-Nut Tubing Cutter: Swing the Blade Support Down and the Jaw Slides to the Tube, Up and the Screw Feeds It (Pritchard, 1941)

Swing-Nut Tubing Cutter: Swing the Blade Support Down and the Jaw Slides to the Tube, Up and the Screw Feeds It (Pritchard, 1941)

Forge tarafındanNO

Metal işleme

14
0
0
0
0
0
V-Slide Tubing Cutter: Two Slide Halves Held on the Ways by One Spring Clip, a Reamer on the Frame (Thewes, 1938)

V-Slide Tubing Cutter: Two Slide Halves Held on the Ways by One Spring Clip, a Reamer on the Frame (Thewes, 1938)

Forge tarafındanNO

Metal işleme

13
0
0
0
0
0
Four-Edge Chatterless Countersinks: Two Pairs of Edges Set Off the Centre Lines, One Raked Each Way (Manewich, 1946)

Four-Edge Chatterless Countersinks: Two Pairs of Edges Set Off the Centre Lines, One Raked Each Way (Manewich, 1946)

Forge tarafındanNO

Metal işleme

13
0
0
0
0
0
Adjustable-Knife Countersink: Three Knives Set Out Evenly by a Collar and Stopped by a Depth Pin (Logan, 1921)

Adjustable-Knife Countersink: Three Knives Set Out Evenly by a Collar and Stopped by a Depth Pin (Logan, 1921)

Forge tarafındanNO

Metal işleme

11
0
0
0
0
0
Spiral-Edge Countersinks: One Curved Slot Up the Cone Makes an Edge That Slices Instead of Scraping (Laursen, 1926)

Spiral-Edge Countersinks: One Curved Slot Up the Cone Makes an Edge That Slices Instead of Scraping (Laursen, 1926)

Forge tarafındanNO

Metal işleme

7
0
0
0
0
0
Threaded-Stud Rubber-Head Hammer: Heads Screw Onto the Body's Own Studs and Lock the Handle's Nail In (Dicks, 1951)

Threaded-Stud Rubber-Head Hammer: Heads Screw Onto the Body's Own Studs and Lock the Handle's Nail In (Dicks, 1951)

Forge tarafındanNO

Metal işleme

9
0
0
0
0
0
Screw-On Rubber Head Mallet: Rubber Members on Flanged Ferrules, Cupped and Cushioned on Steel Studs (Pemmerl, 1950)

Screw-On Rubber Head Mallet: Rubber Members on Flanged Ferrules, Cupped and Cushioned on Steel Studs (Pemmerl, 1950)

Forge tarafındanNO

Metal işleme

6
0
0
0
0
0
Renewable Rubber-Face Hammer: Rolled Faces Pressed Onto Pronged Discs, Driven Out Through a Notch When Worn (Sewell, 1928)

Renewable Rubber-Face Hammer: Rolled Faces Pressed Onto Pronged Discs, Driven Out Through a Notch When Worn (Sewell, 1928)

Forge tarafındanNO

Metal işleme

12
0
0
0
0
0
Laminated Rubber Mallet: A Rubber-and-Canvas Head Locked on a Flared Handle by an Internal Rib (Whisler, 1924)

Laminated Rubber Mallet: A Rubber-and-Canvas Head Locked on a Flared Handle by an Internal Rib (Whisler, 1924)

Forge tarafındanNO

Ağaç işleri

11
0
0
0
0
0
Three-Legged Router: A T-Frame on the Table Beside the Work, Its Depth Set by a Knob While Cutting (Willard & Young, 1939)

Three-Legged Router: A T-Frame on the Table Beside the Work, Its Depth Set by a Knob While Cutting (Willard & Young, 1939)

Forge tarafındanNO

Industry 3.0 — Assembly Line & Mass Production (1913)

8
0
0
0
0
0
362 içinden 24 gösteriliyor