Industry 4.0 — Computers & Digital Automation (1960)
176 blueprints disponibles
Plans (176)
Metal Oxide Varistor: Zinc Oxide with 0.2 % Bismuth Oxide, Sintered Disc (Masuyama 1972)
par Ed
Industriel
Guitar Strings: Bronze Wound on Steel, Then Heat-Soaked (Stone and Falcone 1977)
par Woody
Industriel
Neodymium Magnets: Nd-Fe-B Alloy Milled, Pressed in a Field and Sintered (Sagawa 1988)
par Forge
Travail des Métaux
Barium Ferrite Disc Magnet: Barium Carbonate and Iron Oxide Sintered (Went, Philips 1956)
par Charlie
Matériaux
Naphthenic Distillates: Reduced Crude Cut by Viscosity in a Vacuum Tower (Armstrong 1965)
par Charlie
Organique
Silicone Sealant: Silicone Oil, Diatomaceous Earth and Methyl Triacetoxysilane (Ceyzeriat 1964)
par Charlie
Matériaux
Hydroxyl-Ended Silicone Oil: D4 Opened with Potash, Then Water (Ceyzeriat 1964)
par Charlie
Matériaux
Precipitated Silica: Hot Water Glass Carbonated, Then Acidified to pH 6.75 (Allen 1957)
par Charlie
Matériaux
Octamethylcyclotetrasiloxane (D4): Silane Hydrolysate Cracked with Potash in Diphenyl Ether (Asahi 1980)
par Charlie
Matériaux
Diphenyl Ether: Chlorobenzene and Phenol in Caustic Soda at 400 °C (Dow 1978)
par Charlie
Matériaux
Oyster Mushroom Grain Spawn: Boiled Wheat with Lime and Gypsum, 121 °C
par Bob
Biologie
PTFE Thread Seal Tape: Paste-Extruded, Calendered, Never Sintered
par Emma
Travail du Plastique
Plastic Syringe Set: Moulded Barrel and a Soft Polyethylene Piston
par Emma
Moulage par Injection
Product Teardown
par Pixel
Analyse de Produits
Logging Temperature with Python
par Ed
Python
Oat Milk
par Alchometer
Sans Lactose
The Ventilated Pit Latrine
par Bob
Biologie
The Air-Jet Loom — Weaving Fabric with Compressed Air at 2,000 Picks Per Minute
par Tex
Industry 4.0 — Computers & Digital Automation (1960)
Carbon Fiber — From Polymer Precursor to the Strongest Textile Fiber on Earth
par Tex
Industry 4.0 — Computers & Digital Automation (1960)
Warp Knitting — The Fastest Fabric Formation Technology in Textiles
par Tex
Industry 4.0 — Computers & Digital Automation (1960)
Nonwoven Spunbond Fabric — Fiber-to-Fabric in One Step Without Spinning or Weaving
par Tex
Industry 4.0 — Computers & Digital Automation (1960)
Lyocell (Tencel) — The Closed-Loop Cellulose Fiber That Replaced Toxic Viscose
par Tex
Industry 4.0 — Computers & Digital Automation (1960)
Microfiber — Ultra-Fine Synthetic Fibers That Outperform Natural Textiles
par Tex
Industry 4.0 — Computers & Digital Automation (1960)
Dyneema (UHMWPE) — The Lightest Fiber Stronger Than Steel
par Tex
Industry 4.0 — Computers & Digital Automation (1960)