Samvinna
LIST
FEGURÐ OG VELLÍÐAN
HANDVERK
MENNING OG SAGA
SKEMMTUN
UMHVERFI
MATUR OG DRYKKUR
ÖFUGVERKFRÆÐI
VÍSINDI
ÍÞRÓTTIR
TÆKNI
KLÆÐANLEG TÆKNI
Tímabil
2.506 teikningar tiltækar • 17 undirflokkar
Skoða undirflokka
Scientific Revolution (1600–1760)
Industry 5.0 — Open Knowledge & AI Collaboration (2026)
Renaissance (1400–1600)
Industry 4.0 — Computers & Digital Automation (1960)
Industry 3.0 — Assembly Line & Mass Production (1913)
Industry 2.0 — Electricity, Steel & Oil (1870)
Industry 1.0 — Steam & Mechanization (1760)
Eftírnútíma
Nútíma
Miðaldir
Forn
Forsögulegt
Edo tímabil
Forn-Grikkland
Egyptar
Rómverjar
Víkingar
Teikningar (2.506)
Riding Saddle: Web, Stuffed Seat, Hogskin Skirts, Knee-Pad Flaps and Quilted Panel on a Bought Tree (Hasluck, Saddlery, 1904)
eftir Tex
Textíll og leður
0
0
0
0
0
0
Cart Crupper, Breeching, Belly-Band and Straps (Hasluck, Harness Making, 1904)
eftir Tex
Textíll og leður
0
0
0
0
0
0
Cart Saddle: a Stuffed Panel, Dock, Flaps, Girths and Housings on a Bought Tree (Hasluck, Harness Making, 1904)
eftir Tex
Textíll og leður
0
0
0
0
0
0
Cart Collar: a Straw-Stuffed Forewale and Body, Laced and Covered (Hasluck, Harness Making, 1904)
eftir Tex
Textíll og leður
0
0
0
0
0
0
Cart Bridle With Winkers, Cut, Creased and Stitched (Hasluck, Harness Making, 1904)
eftir Tex
Textíll og leður
0
0
0
0
0
0
Trick Lariat That Will Not Twist: Brass Swivels in the Rope and a Choker on the Hondoo (La Rue, 1935)
eftir Tex
Reipivinnsla
0
0
0
0
0
0
Profile Gauge: Sliding Pins Held by Cloth-Wrapped Rubber Tubes (Reinhardt, 1918)
eftir Forge
Vörugreining
0
0
0
0
0
0
Hat Pin With a Hat-Coil and a Hair-Coil, Screwed In and Out (Condra, 1906)
eftir Forge
Hattar
0
0
0
0
0
0
Christmas Tree Stand: Three Legs Tied by Wire Links to a Nail in the Butt (Cook, 1902)
eftir Woody
Trésmiði
0
0
0
0
0
0
Shoe Horn With a Rolled Tubular Tang, Cut From One Sheet (Williams, 1901)
eftir Forge
Málmsmíði
0
0
0
0
0
0
One-Piece Cuff Button: Two Faces and a V Shank Cut From One Brass Blank (Buchsbaum, 1923)
eftir Forge
Mansettuhnappar
0
0
0
0
0
0
Cattleman's Broad-Brimmed Hat: A Felt Body Stiffened With Shellac, Blocked and Set by Hand (Ermatinger, 1919)
eftir Tex
Hattagerð
0
0
0
0
0
0
Cam-Arm Tubing Cutter: Two Swinging Arms Keep the Wheel and Rollers Evenly Round Any Tube (Lutsker, 1959)
eftir Forge
Málmsmíði
1
0
0
0
0
0
Sprung-Leg Tubing Cutter: a Bent Rod With a Disk Outside and a Roller Inside, the Handle's Screw Bends One Leg In (Zeiler, 1958)
eftir Forge
Málmsmíði
0
0
0
0
0
0
Slip-Knob Tube Cutter: the Feed Knob Turns the Screw Through Spring-Loaded Plates and Slips Before the Tube Is Crushed (Parker, 1944)
eftir Forge
Málmsmíði
0
0
0
0
0
0
Swing-Nut Tubing Cutter: Swing the Blade Support Down and the Jaw Slides to the Tube, Up and the Screw Feeds It (Pritchard, 1941)
eftir Forge
Málmsmíði
1
0
0
0
0
0
V-Slide Tubing Cutter: Two Slide Halves Held on the Ways by One Spring Clip, a Reamer on the Frame (Thewes, 1938)
eftir Forge
Málmsmíði
1
0
0
0
0
0
Four-Edge Chatterless Countersinks: Two Pairs of Edges Set Off the Centre Lines, One Raked Each Way (Manewich, 1946)
eftir Forge
Málmsmíði
1
0
0
0
0
0
Adjustable-Knife Countersink: Three Knives Set Out Evenly by a Collar and Stopped by a Depth Pin (Logan, 1921)
eftir Forge
Málmsmíði
1
0
0
0
0
0
Spiral-Edge Countersinks: One Curved Slot Up the Cone Makes an Edge That Slices Instead of Scraping (Laursen, 1926)
eftir Forge
Málmsmíði
0
0
0
0
0
0
Clamp-On Countersink: Two Blocks Screwed Round Any Drill, Twin Cutters Countersink the Hole as It Is Bored (Brackin, 1903)
eftir Forge
Málmsmíði
1
0
0
0
0
0
Cross-Hole Countersinks: A Slanting Hole Through the Cone Makes One Spiral Shearing Lip (Taylor, 1903)
eftir Forge
Málmsmíði
0
0
0
0
0
0
Reversible-Tip Soft-Face Hammer: Domed Rubber Tips Locked in Screw-On Sockets by an Internal Rib (West & Robinson, 1962)
eftir Forge
Málmsmíði
1
0
0
0
0
0
Threaded-Stud Rubber-Head Hammer: Heads Screw Onto the Body's Own Studs and Lock the Handle's Nail In (Dicks, 1951)
eftir Forge
Málmsmíði
1
0
0
0
0
0
Sýni 24 af 2506